Упаковка полупроводников2025

Пористость шаров BGA на шлифах и оптимизация оплавления

BID-500: пористость BGA по IPC-A-610, с 18% до 9%.

Компания
Завод упаковки и тестирования, Юж. Китай
Адрес
Гуандун
Категория
Микроскопы
Пористость шаров BGA на шлифах и оптимизация оплавления
18% → 9%Пористость

X-ray showed elevated voiding in a BGA lot (some joints >25%); the customer demanded sectioning data plus corrective actions.

Solution: the BID-500 system applied IPC-A-610 step-sectioning: grinding along the diagonal to joint mid-sections, void area fraction measured at 200X on 12 corner joints per device, with a reflow-profile DOE in parallel.

Result: sectioning gave an 18% mean void rate. Lowering peak temperature from 250℃ to 242℃ and extending soak by 15 s cut voiding to 9%; all joints passed the 25% acceptance line.

⇄0СравнениеСравнение характеристик