HOT
YR1000U-3050 · 2026-11-17 · +86 21 5748 2007
YR1000U-3050 Photoelectric Autocollimator (25/10 m)
Photoelectric Autocollimator · 25/10 m
- 物镜焦距300mm
- 物镜口径50mm (NA. = 90%)
- 光源类型大功率半导体光源(中心波长λ= 630nm)
- 探测器两个科学级高分辨率探测器
By submitting you agree to our privacy policy.
제품 개요
YR1000系列高精度电子自准直仪结合了我公司电子目镜技术、高分辨率图像传感技术和高速嵌入式数字图像处理技术,可同时对两个方向的角度进行测量,提供最高0.2角秒的测量精度和最高1KHz的动态频响。
YR1000由高精度电子读数头、物镜管、可调底座、反光镜、显示控制器(或PC机)、激光快速找准器等构成。运行于显示控制器的测量软件可显示大视野的电子目镜及测量数据,并可将数据保存为Excel兼容格式;激光快速找准器用于快速找准和调整,采用LVDS接口的型号可提供高速测量的同时,电缆连接长度可达到30米。
用户可通过选配其它测量配附件及测量软件完成动态测量应用,包括对角度、直线度、垂直度、平行度、平面度、同轴度等的高精度测量。是精密机械制造、光学加工、航空航天、计量实验室理想的角度测量仪器。
二、YR1000系列高精度电子自准直仪产品特点:
产品特性: 最高0.2角秒中心测角精度; 最高1KHz频响; XY双轴同时测量; 大视野电子目镜; 科学级高分辨率CCD传感器; 长寿命LED光源; 全数字信号处理; 即插即用USB接口;
丰富的测量配附件;典型应用:精密机械安装定位; 机械产品直线度、平面度、垂直度、平行度等精度保障; 精密旋转台检测; 航空航天; 光学产品装配及调整; 光学及机械结构稳定性或振动测试;
物理及光学实验室。
三、YR1000系列高精度电子自准直仪技术参数:
型号
YR1000U-3050
YR1000UH-3050
物镜焦距
300mm
物镜口径
50mm (NA. = 90%)
光源类型
大功率半导体光源(中心波长λ= 630nm)
探测器
两个科学级高分辨率探测器
目镜
软件显示的大视野电子目镜
测量频响
25Hz TYP
接口
USB 2.0 High Speed Interface
测量距离
25米
10米
最大读数视场
3000″ (arc sec. 角秒)
2400″ (arc sec. 角秒)
分辨率
0.1″ (arc sec. 角秒)
0.05″ (arc sec. 角秒)
测量精度
±100"
±0.3″ (arc sec. 角秒)
±0.2″ (arc sec. 角秒)
±1000"
±1″ (arc sec. 角秒)
±0.5″ (arc sec. 角秒)
重复性
0.1″ (arc sec. 角秒)
0.05″ (arc sec. 角秒)
外形尺寸(不含底座)
360mm(L)×86mm(W)×105mm(H)
重量(不含底座)
3.5 KG
YR1000U-3050 Photoelectric Autocollimator (25/10 m) supplied by CHWES. 15 key specifications available on request.
사양
| 物镜焦距 | 300mm |
|---|---|
| 物镜口径 | 50mm (NA. = 90%) |
| 光源类型 | 大功率半导体光源(中心波长λ= 630nm) |
| 探测器 | 两个科学级高分辨率探测器 |
| 目镜 | 软件显示的大视野电子目镜 |
| 测量频响 | 25Hz TYP |
| 接口 | USB 2.0 High Speed Interface |
| 测量距离 | 25米 / 10米 |
| 最大读数视场 | 3000″ (arc sec. 角秒) / 2400″ (arc sec. 角秒) |
| 分辨率 | 0.1″ (arc sec. 角秒) / 0.05″ (arc sec. 角秒) |
| 测量精度 | ±100" / ±0.3″ (arc sec. 角秒) / ±0.2″ (arc sec. 角秒) |
| ±1000" | ±1″ (arc sec. 角秒) / ±0.5″ (arc sec. 角秒) |
| 重复性 | 0.1″ (arc sec. 角秒) / 0.05″ (arc sec. 角秒) |
| 外形尺寸(不含底座) | 360mm(L)×86mm(W)×105mm(H) |
| 重量(不含底座) | 3.5 KG |
* Generated by rule engine over the product database; for pre-selection only.
측정 원리
An autocollimator projects an illuminated cross-line as a parallel beam onto an external mirror. The mirror returns the beam, which re-images on the reticle or a CCD/CMOS sensor. If the mirror tilts by θ, the return image shifts by s = 2f·tanθ — the angle is doubled optically and magnified by the focal length.
Photoelectric readout (CCD/CMOS centroiding or PSD differential detection with software subdivision) reaches 0.1″ resolution. Dual-axis models read horizontal and vertical tilt simultaneously; large-field versions such as the HXDS15-4000 (4000×3000″) image a wide angular range for dynamic measurements.
Stepping a mirror bridge along a guideway converts per-step tilts θi into elevation differences hi = L·tanθi for straightness and flatness; with polygons or multi-tooth tables the same instrument calibrates circular indexing.
Process animation
- Setup: mount the mirror on a bridge of span L at the start of the guideway.
- Zeroing: adjust the autocollimator until the cross image centres, record the initial reading.
- Step: advance the bridge by L each station, logging θi (both axes on dual-axis models).
- Evaluate: accumulate hi = L·tanθi and rate straightness or flatness by end-point or minimum-zone methods.
- Indexing: with a polygon, successive face readings give the index error; issue the report.
Calculation & formulas
1. Angle-image relation: θ = s/(2f); with f = 500 mm and s = 5 µm, θ ≈ 1.03″ (1″ ≈ 4.85 µrad).
2. Resolution: 0.1″ corresponds to s ≈ 0.485 µm at f = 500 mm — pixels ≤5 µm plus 1/10 subdivision.
3. Elevation step: h = L·tanθ; a 100 mm bridge at 2″ gives h ≈ 0.97 µm.
4. End-point straightness: cumulative deviations Δi = Σhk − (i/n)Σh, error f = max(Δ) − min(Δ); the minimum-zone method rotates the datum per convex/concave/alternating criteria.
5. Indexing: per-face errors φj minus nominal; the closure Σφ = 0 checks the full circle.
규격
| Standard | Title | Scope |
|---|---|---|
| JJG 202-2007 | Verification regulation of autocollimators | Indication error and resolution |
| GB/T 11336-2004 | Detection of straightness error | Guideway and surface-plate straightness |
| GB/T 1958-2017 | GPS — detection and evaluation of geometrical deviations | Flatness, squareness and other form errors |
| ISO 230-1 | Machine tools — geometric accuracy tests | Machine acceptance |
| JJG 283-2007 | Multi-tooth indexing table verification | Circular indexing calibration |
Accredited labs must also hold 20±0.5 °C and vibration isolation, with instrument error within the 0.5″/1″ class.
선택 가이드
1. Resolution decides acceptance capability: 0.1″ (HXJL300-0.1, HXJL300U-0.1, HXJL300UH-0.1) for precision machines, rotary tables and laboratory standards; 0.2–0.3″ for general machine acceptance; 0.5–1″ (HXM series) for on-site alignment and long-range monitoring.
2. Distance decides aperture: 5–10 m with HXM2010/HXJL200; 20–30 m with HXM2020/HXM3030; 35–40 m with HXM3540; 50 m baseline with HXM4050M-1. Mirror aperture and light budget matter more as distance grows.
3. Single or dual axis: single-axis HXJL for one-direction straightness; dual-axis HXM for both directions and polygon indexing.
4. Dynamic work: HXDS15-4000 with a large field and high sampling rate for rotary-table oscillation, shaker tables and thermal drift.
5. Accessories: mirror bridges at 50/100/200 mm span, 12/24/36-face polygons, pentaprism for squareness, intermediate targets for long runs, thermal hoods for workshops.
6. Software and compliance: end-point, minimum-zone and least-squares evaluation with ISO 230-1 reports; labs also need the standard-artefact interface for verification.
| Model | Resolution | Distance | Typical use |
|---|---|---|---|
| HXJL300UH-0.1 | 0.1″ | 0–10 m | Precision tables, lab standards |
| HXJL300U-0.1 / HXJL300-0.1 | 0.1″ | 0–10 m | Precision guideways and plates |
| HXJL300-0.2 / -0.3 | 0.2–0.3″ | 0–10 m | General machine acceptance |
| HXM2010 / HXM2020 | 0.5–1″ | 10–20 m | Mid-size gantry, moulding machines |
| HXM3030 / HXM3540 | 0.5–1″ | 30–40 m | Large gantry, marine parts |
| HXM4050M-1 | 1″ | 50 m | Long guideways, cross-shop datums |
| HXDS15-4000 | Dynamic dual-axis | Large field | Table oscillation, vibration |
Common mistakes: using a 1″ unit to trend a 0.02 mm/m guideway; ignoring bridge sag under mirror weight; not controlling air currents and floor vibration, so readings never settle.
시험 방법
Environment: 20±0.5 °C (±2 °C on the floor with compensation), shield air currents and sunlight; soak the instrument and bridge for 30 minutes on an isolated base.
Straightness procedure: ① clean the guideway and set the bridge span L; ② zero at the first station after 10 minutes of warm-up; ③ step by exactly L (within 0.5 mm), logging both axes; ④ evaluate by end-point and minimum-zone methods and report the larger; ⑤ record span, temperature and uncertainty (typically U ≈ 0.5″ + 2% of reading).
Intermediate checks: monthly 12-face polygon closure (Σ = 0, residual ≤0.3″); send standards out every two years.
Pitfalls: span errors feed straight into height differences; air currents jitter the centroid; thermal gradients bend long guideways optically — measure morning and afternoon and average.
Industry applications
- Machine tools: gantry and boring-mill guideway straightness, column and spindle squareness, table flatness to ISO 230-1 and GB/T 11336; repeatability ≤1 µm over 24 m with the end-point method.
- Metrology institutes: surface-plate flatness, cross-checks with electronic levels, small-angle standard build-up; indication error within ±0.5″/±1″ per JJG 202-2007.
- Indexing and rotary tables: multi-tooth tables, optical and CNC rotary tables, RV reducer backlash; full-circle checks with 12/24/36-face polygons, indexing error ≤±1″.
- Semiconductor stages: micro-angle feedback and thermal drift monitoring on air-bearing and wafer stages, resolution ≤0.01″ at ≥10 Hz.
- Inertial navigation and optics: reference-mirror alignment and angle transfer for gyro platforms, theodolites and interferometers.
- Energy equipment: turbine bearing alignment, wind-turbine flange squareness, long hydro shaft lines.
- Rail and elevators: guide-rail straightness and twist, body datum flatness, often at 30–50 m working distance.
- Research and teaching: optical bench levelling and micro-angle measurement.


