The boom is 8 m long and 3.2 t; after welding, lug coaxiality (Φ0.3), pin-hole spacing and boom straightness must be checked. The old route craned it to the CMM room and measured in sections over two days, and moving the part could distort it, so the measured state was not the working state.
Solution: MC003-SCANARM with a 4 m arm and laser scanner, measured directly on the fixture with re-positioning on common datum points; lug bores and pin seats are scanned and axes fitted for coaxiality.
Result: 90 minutes per boom with coaxiality repeatability within 0.05 mm; three parts exceeded tolerance at 0.42 mm, traced to uneven shrinkage from the welding sequence and brought to 0.18 mm after re-sequencing, with craning eliminated and safety risk reduced.




