YRWT-M100 Electronic Universal Testing Machine (100KN)

Electronic Universal Testing Machine · 100KN

ModelYRWT-M100
  • 规格YRWT-M100
  • 精度等级1级或0.5级
  • 最大负荷100KN
  • 有效测力范围1/100-100/%

By submitting you agree to our privacy policy.

01

Overview

YRWT-M100系列微机控制电子万能试验机可分为高精度的0.5级万能试验机与通用的1级万能试验机。万能试验机适用于 橡胶、塑料、纺织物、电线电缆、金属细丝、金属薄板、金属圆棒、 化纤、陶瓷材料、PVC材料、 包装材料、电子器件等材料的拉伸、拉脱、剥离、焊接强度、粘接强度、压缩、弯曲、等力学性能的测试,也适用于塑料、薄膜、医学、丝材、纤维、电子部件的拉脱、印刷电路板的剥离试验、电路板的弯曲强度试验、弹簧及机械制造加工等行业。也是科研院所、大专院校、工矿企业、技术监督、航空航天、质量检查等部门的理想测试设备. 根据GB/T2611《试验机通用技术条件》和GB/T 16491《电子式万能试验机》标准制造;根据GB/T12160《单轴试验用引伸计的规定》和GB/T16825《拉力试验机的检验》进行检定和验收。适用标准:适用ASTM、DIN、ISO、JIS、BS等国际标准。
性能特点:
1、自动清零:计算机接到试验开始指令,测量系统便自动清零;
2、自动返车:自动识别试验最大力,活动横梁自动高速返回初始位置;
3、自动存档:试验资料和实验条件自动存盘,杜绝因突然断电忘记存盘引起的资料丢失;
4、测试过程:试验过程及测量、显示、分析等均由微机完成;
5、显示方式:数据和曲线随试验过程动态显示;
6、结果再现:试验结果可任意存取,可对数据曲线再分析;
7、曲线遍历:试验完成后,可用鼠标找出试验曲线逐点的力值和变形数据,对求取各种材料的试验数据方便实用;
8、结果对比:多个试验特性曲线可用不同颜色迭加、再现、放大、呈现一组试样的分析比较;
9、曲线选择:可根据需要选择应力应变、力时间、强度时间等曲线进行显示和打印;
10、批量试验:对参数相同的试验一次设定后可顺次完成一批试样的试验;
11、试验报告:(标准格式)
拉伸:最大力、拉伸强度、断裂伸长率、弹性模量;
压缩:最大力、压缩强度、屈服强度、弹性模量,也可按用户要求的格式对试验报告进行编程和打印;
12、限位保护:具有程控和机械两级保护;
13、过载保护:当负载超过额定的10%时自动停机;
紧急停机:设有急停开关,用于紧急状态切断整机电源;
自动诊断:系统具有自动诊断功能,定时对测量系统,驱动系统进行过压,过流、超温等到检查,出现异常情况即刻停机; 
14、实现主机和微机独立操作;
试验机工作条件:
1、电源:AC220V 400W
2、环境温度:10℃~40℃
3、相对湿度:≤80%
4、工作环境应清洁,无腐蚀性介质、无明显震源和电磁干扰,有可靠的地线。
技术参数:
1.规格:YRWT-M100;
2.精度等级:1级或0.5级;
3.最大负荷:100KN;
4.有效测力范围:1/100-100/%;
5.试验力分辨率,最大负荷50万码:内外不分文件,且全程分辨率不变。
6.有效试验宽度:350mm
7.有效试验空间:650mm
8.试验速度:1~300mm/min(任意调)
9. 速度精度:示值的±1%以内;
10.位移测量精度:示值的±1%以内;
11.变形测量精度:示值的±1%以内;
12.试台升降装置:快/慢两种速度控制,
13.试台安全装置:电子限位保护
14.试台返回:手动可以最高速度返回试验初始位置,自动可在试验结束后自动返回;
15.超载保护:超过最大负荷10%时自动保护;
16.电机:750W
17.主机尺寸:约700×450×1700mm
18.主机重量:约350kg
配置:
YRWT-M100一台;
高精度传感器(精度FS0.02%)一只;
东能伺服系统一套;
高精度滚珠丝杠两根;
同步系统一套;
微机测量控制系统一套(含品牌电脑和软件等);
拉伸夹具一套;
遥控操作系统一套;

YRWT-M100 Electronic Universal Testing Machine (100KN) supplied by CHWES. 18 key specifications available on request.

02

Specifications

规格YRWT-M100
精度等级1级或0.5级
最大负荷100KN
有效测力范围1/100-100/%
试验力分辨率,最大负荷50万码内外不分文件,且全程分辨率不变
有效试验宽度350mm
有效试验空间650mm
试验速度1~300mm/min(任意调)
9. 速度精度示值的±1%以内
位移测量精度示值的±1%以内
变形测量精度示值的±1%以内
试台升降装置快/慢两种速度控制
试台安全装置电子限位保护
试台返回手动可以最高速度返回试验初始位置,自动可在试验结束后自动返回
超载保护超过最大负荷10%时自动保护
电机750W
主机尺寸约700×450×1700mm
主机重量约350kg;YRWT-M100一台;高精度传感器(精度FS0.02%)一只;东能伺服系统一套;高精度滚珠丝杠两根;同步系统一套;微机测量控制系统一套(含品牌电脑和软件等);拉伸夹具一套

* Generated by rule engine over the product database; for pre-selection only.

03

Working principle

A universal testing machine comprises the load frame, drive system, load cell, displacement/extensometer measurement and closed-loop control. A servo motor and screw drive the crosshead (or a servo valve drives the actuator); the load cell converts force to a signal, the extensometer measures strain over the gauge length, and the controller follows the programmed rate while logging force–displacement–strain.

Software derives upper and lower yield strength (ReH/ReL), tensile strength Rm, elongation A, reduction of area Z and modulus E. Control modes include speed, force, displacement and strain; GB/T 228.1-2021 requires strain control in the yield region (method A) for lower uncertainty.

  • Electromechanical: 1–600 kN for metals, plastics and composites.
  • Servo-hydraulic: 300–2000 kN for high-strength steel, fasteners and bars.
  • Specialised: friction and wear, impact, bend, peel.
04

Process animation

  1. Measure width and thickness (or diameter) at three points; compute S₀.
  2. Clamp with wedge or hydraulic grips, aligned to avoid bending.
  3. Extensometer attached to the gauge length, zeroed.
  4. Load: speed control in the elastic range, strain control at yield, speed control in hardening.
  5. Fracture: detect peak and break, stop.
  6. Report: ReH/ReL/Rm/A/Z with curves and data tables.
0102030405
05

Calculation & formulas

1. Tensile strength: Rm = Fmax/S0; a 10 mm bar (S0=78.5 mm²) breaking at 62.8 kN gives Rm ≈ 800 MPa.

2. Yield: Rp0.2 is interpolated from the extensometer curve at 0.2% non-proportional extension.

3. Elongation & reduction: A = (Lu−L0)/L0; Z = (S0−Su)/S0; L0=50, Lu=62.5 mm → A = 25%.

4. Friction coefficient: μ = F/N; at N = 100 N and F = 32 N, μ = 0.32. Four-ball results report PB (last non-seizure) and PD (weld) loads.

5. Wear rate: k = V/(F·s); obtain V from Δm/ρ. Typical specific wear rates run 10⁻⁸–10⁻⁶ mm³/(N·m).

06

Standards

StandardTitleScope
GB/T 228.1-2021Metallic materials — tensile testing, room temperatureTension
ISO 6892-1Tensile testing at room temperatureExport projects
ASTM E8/E8MTension testing of metallic materialsAmericas
GB/T 7314-2017Compression testing at room temperatureCompression
GB/T 232-2010Bend testing of metallic materialsBending
GB/T 3098.1-2010Mechanical properties of fastenersFasteners
07

Selection guide

1. Frame capacity plus 20–30%: Φ32 rebar yields near 630 kN so choose 1000 kN; M30 proof load is about 550 kN so choose 600–1000 kN. Running at full scale accelerates load-cell fatigue.

2. Servo-hydraulic or electromechanical: ≥300 kN with high stiffness and long stroke (rebar, bolts, concrete) needs servo-hydraulic (WAW/WEW); ≤300 kN with tight speed control (plastics, composites) suits electromechanical frames (WDS).

3. Display, digital or PC-controlled: a digital readout for single values; PC control (the -C suffix) for stress-strain curves, reports and batch data.

4. Fixtures often matter more than the frame: ribbed grips for rebar, proof-load fixtures for bolts, wrap grips for cables. Poor alignment costs 2–3 percentage points of elongation.

5. Extensometers and options: contact or video extensometers for modulus, high-temperature furnaces and extensometers, large platens with displacement control for battery crush.

6. Foundation and safety: a 1000 kN frame needs an isolated concrete base, guard doors and e-stops; hydraulic units need oil-temperature management.

SeriesTypeForce rangeTypical specimens
WDS-1G to 300GElectromechanical1–300 kNPlastics, composites, small parts
WEW-100D to 1000DHydraulic, digital100–1000 kNRebar, bolts, metals
WEW-300C to 2000CHydraulic, PC300–2000 kNHigh-strength bolts, forgings
WAW-100 to 1000Servo-hydraulic100–1000 kNRate-controlled acceptance
WAW-300C to 2000CServo-hydraulic, PC300–2000 kNBridges, nuclear components
WES-300C to 2000CCompression300–2000 kNConcrete, blocks
MMW-1A / MRS-10WFriction and wear—Lubricants, coatings

Three acceptance checks: verify force at 20/50/80% with a standard load cell; check alignment so a standard specimen breaks mid-gauge; run three identical specimens and look at scatter.

08

Test method

Specimen. Proportional (L₀ = 5.65√S₀) or non-proportional specimens to GB/T 228.1; transition radius R ≥ 5 mm; Ra ≤ 1.6 µm with work-hardened layers removed.

Measurement. Width and thickness at three positions within the gauge length, use the minimum for S₀; below 1 mm use optical or 0.001 mm micrometers.

Loading. 5–30 MPa/s in the elastic range, 0.00025/s strain rate at yield per method A, up to 0.0067/s in hardening; log at 100 Hz or more to catch yield serrations.

Evaluation. ReH is the first peak, ReL the lowest point, Rm the maximum force over S₀, A from the final gauge length (offset method), Z from the minimum fracture diameter.

Quality control. Daily check with a reference specimen, monthly force calibration with a class 0.3 proving instrument, half-yearly extensometer calibration, 23 ± 5 °C.

09

Industry applications

  • Construction and bridges: rebar tensile and bend, high-strength bolt wedge load, strand relaxation, concrete compression, with loading-rate control to GB/T 228.1 and GB/T 3098.1.
  • Metals and forgings: room and elevated temperature tensile, yield strength, elongation and reduction of area for material verification.
  • Automotive parts: chassis tension-compression, suspension springs, seat-belt anchorages, battery-pack crush with dedicated fixtures.
  • Fasteners: proof load, nut proof load, washer elasticity; fixture alignment drives scatter.
  • Plastics and composites: tension, flexure, compression and shear on low-force frames (WDS) with non-contact extensometers.
  • Cables and ropes: breaking force and elongation with long stroke and large-deformation grips.
  • Friction and wear: MMW/MRS four-ball, reciprocating and ring-block tests for lubricants and coatings.
  • Third-party testing: calibrated frames with tamper-evident data and raw curve export.
10

Price and lead time for this model

By submitting you agree to our privacy policy.

⇄0CompareProduct comparison