HOTWEW300-600B Hydraulic Universal Testing Machine
Hydraulic Universal Testing Machine
- 最大试验力100KN / 300KN / 600KN / 1000KN
- 测试范围5-100KN / 12-300KN / 50-600KN / 50-1000KN
WDS10-100 · 2026-11-17 · +86 21 5748 2007
Electronic Universal Testing Machine · 1-10 t
By submitting you agree to our privacy policy.
WDS系列试验机分单立柱主机和双立柱主机。其中数显双立柱主机包含9个型号,测试载荷 能力最大分别为1KN、2KN、5KN、10KN、20KN、50KN、100KN、200KN、300KN, 每种型号根据最终应用又可分为高精度的0.5级万能试验机与通用的1级万能试验机。 万能试验机适用于橡胶、塑料、纺织物、电线电缆、金属细丝、金属薄板、金属圆棒、化纤、陶瓷材料、 PVC材料、 包装材料、电子器件等材料的拉伸、拉脱、剥离、焊接强度、 粘接强度、压缩、弯曲、剪切等力学性能的测试,而其它的三种型号适用于塑料、薄膜、医学、丝材、纤维、电子部件的拉脱、印刷电路板的剥离试验、电路板的弯曲强度试验、弹簧、金属制造等行业。
性能特点:
1.可选配微机打印接口。
2.双向测量,灵敏度较高,可达1/20000MFS。
3.可选配进口部件,载荷精度范围可达:0.2~100%。
4.可选配更高级别的调速范围。
5.具有可靠的性能以及限位、过流、过压、过载等保护装置。
6.可定制试验机主机颜色及主机形式(台式和落地式)。
技术参数:
产品型号
WDS-10
WDS-20
WDS-50
WDS-100
最大试验力
10KN
20KN
50KN
100KN
测试范围
0.2-10KN
0.4-20KN
1-50KN
2-100KN
测试准确度
±1%或±0.5%
位移分辨率
0.01mm
实验空间
拉伸:600;压缩:700;有效宽度:400;
实验级别
0.5或1级
位移速度范围
0.1-500mm/min(可选配更精细调速范围)
主机尺寸
500X750X1760mm(其中100KN主机为550X850X2000)
整机重量
480kg(其中100KN主机为750kg)
电源
单相,220V±10%,50Hz
WDS10-100 Electronic Universal Testing Machine (1-10 t) supplied by CHWES. 10 key specifications available on request.
| 最大试验力 | 10KN / 20KN / 50KN / 100KN |
|---|---|
| 测试范围 | 0.2-10KN / 0.4-20KN / 1-50KN / 2-100KN |
| 测试准确度 | ±1%或±0.5% |
| 位移分辨率 | 0.01mm |
| 实验空间 | 拉伸:600;压缩:700;有效宽度:400; |
| 实验级别 | 0.5或1级 |
| 位移速度范围 | 0.1-500mm/min(可选配更精细调速范围) |
| 主机尺寸 | 500X750X1760mm(其中100KN主机为550X850X2000) |
| 整机重量 | 480kg(其中100KN主机为750kg) |
| 电源 | 单相,220V±10%,50Hz |
* Generated by rule engine over the product database; for pre-selection only.
A universal testing machine comprises the load frame, drive system, load cell, displacement/extensometer measurement and closed-loop control. A servo motor and screw drive the crosshead (or a servo valve drives the actuator); the load cell converts force to a signal, the extensometer measures strain over the gauge length, and the controller follows the programmed rate while logging force–displacement–strain.
Software derives upper and lower yield strength (ReH/ReL), tensile strength Rm, elongation A, reduction of area Z and modulus E. Control modes include speed, force, displacement and strain; GB/T 228.1-2021 requires strain control in the yield region (method A) for lower uncertainty.
1. Tensile strength: Rm = Fmax/S0; a 10 mm bar (S0=78.5 mm²) breaking at 62.8 kN gives Rm ≈ 800 MPa.
2. Yield: Rp0.2 is interpolated from the extensometer curve at 0.2% non-proportional extension.
3. Elongation & reduction: A = (Lu−L0)/L0; Z = (S0−Su)/S0; L0=50, Lu=62.5 mm → A = 25%.
4. Friction coefficient: μ = F/N; at N = 100 N and F = 32 N, μ = 0.32. Four-ball results report PB (last non-seizure) and PD (weld) loads.
5. Wear rate: k = V/(F·s); obtain V from Δm/ρ. Typical specific wear rates run 10⁻⁸–10⁻⁶ mm³/(N·m).
| Standard | Title | Scope |
|---|---|---|
| GB/T 228.1-2021 | Metallic materials — tensile testing, room temperature | Tension |
| ISO 6892-1 | Tensile testing at room temperature | Export projects |
| ASTM E8/E8M | Tension testing of metallic materials | Americas |
| GB/T 7314-2017 | Compression testing at room temperature | Compression |
| GB/T 232-2010 | Bend testing of metallic materials | Bending |
| GB/T 3098.1-2010 | Mechanical properties of fasteners | Fasteners |
1. Frame capacity plus 20–30%: Φ32 rebar yields near 630 kN so choose 1000 kN; M30 proof load is about 550 kN so choose 600–1000 kN. Running at full scale accelerates load-cell fatigue.
2. Servo-hydraulic or electromechanical: ≥300 kN with high stiffness and long stroke (rebar, bolts, concrete) needs servo-hydraulic (WAW/WEW); ≤300 kN with tight speed control (plastics, composites) suits electromechanical frames (WDS).
3. Display, digital or PC-controlled: a digital readout for single values; PC control (the -C suffix) for stress-strain curves, reports and batch data.
4. Fixtures often matter more than the frame: ribbed grips for rebar, proof-load fixtures for bolts, wrap grips for cables. Poor alignment costs 2–3 percentage points of elongation.
5. Extensometers and options: contact or video extensometers for modulus, high-temperature furnaces and extensometers, large platens with displacement control for battery crush.
6. Foundation and safety: a 1000 kN frame needs an isolated concrete base, guard doors and e-stops; hydraulic units need oil-temperature management.
| Series | Type | Force range | Typical specimens |
|---|---|---|---|
| WDS-1G to 300G | Electromechanical | 1–300 kN | Plastics, composites, small parts |
| WEW-100D to 1000D | Hydraulic, digital | 100–1000 kN | Rebar, bolts, metals |
| WEW-300C to 2000C | Hydraulic, PC | 300–2000 kN | High-strength bolts, forgings |
| WAW-100 to 1000 | Servo-hydraulic | 100–1000 kN | Rate-controlled acceptance |
| WAW-300C to 2000C | Servo-hydraulic, PC | 300–2000 kN | Bridges, nuclear components |
| WES-300C to 2000C | Compression | 300–2000 kN | Concrete, blocks |
| MMW-1A / MRS-10W | Friction and wear | — | Lubricants, coatings |
Three acceptance checks: verify force at 20/50/80% with a standard load cell; check alignment so a standard specimen breaks mid-gauge; run three identical specimens and look at scatter.
Specimen. Proportional (L₀ = 5.65√S₀) or non-proportional specimens to GB/T 228.1; transition radius R ≥ 5 mm; Ra ≤ 1.6 µm with work-hardened layers removed.
Measurement. Width and thickness at three positions within the gauge length, use the minimum for S₀; below 1 mm use optical or 0.001 mm micrometers.
Loading. 5–30 MPa/s in the elastic range, 0.00025/s strain rate at yield per method A, up to 0.0067/s in hardening; log at 100 Hz or more to catch yield serrations.
Evaluation. ReH is the first peak, ReL the lowest point, Rm the maximum force over S₀, A from the final gauge length (offset method), Z from the minimum fracture diameter.
Quality control. Daily check with a reference specimen, monthly force calibration with a class 0.3 proving instrument, half-yearly extensometer calibration, 23 ± 5 °C.