HOTHMAS-D5/10/30/50SZA Vickers Hardness Tester
Vickers Hardness Tester
- 测量分析系统HMAS‑硬度测量分析系统
- 光学成像系统维氏硬度大三通光学成像系统
HRS-150F · 2026-11-17 · +86 21 5748 2007
Rockwell Hardness Tester
By submitting you agree to our privacy policy.
洛氏硬度计MC010系列
HRS-150M
触摸屏洛氏硬度计
HRS-150F
传感器数显洛氏硬度计
XHRS-150M 触摸屏数显塑料洛氏硬度计
YHRI-45M
传感器数显表面洛氏硬度计
YHRI-150SM 传感器数显全洛氏硬度计
HBRVS-187.5 数显全布洛维硬度计
HBRVS-187.5MV 智能数显布洛维硬度计
YHRI-150M 传感器数显洛氏硬度计
YXHRI-150M 传感器数显塑料洛氏硬度计
HR-150A
洛氏硬度计
HR-150DT
电动洛氏硬度计
HRS-150
数显洛氏硬度计
HRS-150MJ 加高型触摸屏数显洛氏硬度计
HRZ-150
智能触摸屏洛氏硬度计
HRZ-150S
智能触摸屏全洛氏硬度计
ZHR-150S
电脑洛氏硬度计
ZHR-150SS 电脑全洛氏硬度计
ZXHR-150S 电脑塑料洛氏硬度计
HRZ-45
智能触摸屏表面洛氏硬度计
ZHR-45S
电脑表面洛氏硬度计
HBRV-187.5 布洛维硬度计
HBRVW-187.5 智能布洛维硬度计
ZHBRVS-187.5 电脑布洛维硬度计
显微硬度计
HMAS-D1000SZA
自动显微硬度测量分析系统
HMAS-C1000SZA
自动显微硬度测量分析系统
HMAS-D1000(SM)(Z)
显微硬度测量分析系统
MVSD
- 1000AE 单视觉显微硬度计
MVSD-1000AEZ 单视觉显微硬度计
HV-1000 显微硬度计
HV-1000Z 自动转塔显微硬度计
HVS-1000M 触摸屏显微硬度计
HVS-1000MZ 触摸屏自动转塔显微硬度计
MVSS - 1000AE 双视觉显微硬度计
MVSS - 1000AEZ 双视觉显微硬度计
HVS-1000 数显显微硬度计
HVS-1000Z 数显自动转塔显微硬度计
HMAS-D
显微硬度计测量分析系统
HMAS-DS 显微硬度计测量分析系统
HMAS-DSZ 显微硬度计测量分析系统
HMAS-DSM 显微硬度计测量分析系统
HMAS-DSMZ 显微硬度计测量分析系统
HMAS-CSZD 显微硬度计测量分析系统
HMAS-CSZA 显微硬度计测量分析系统
HMAS-ROLL 版辊显微硬度测量分析系统
维氏硬度计MC010系列
HMAS-D5/10/30/50(M)(Z)
维氏硬度测量分析系统
HMAS-D5/10/30/50SZA
自动维氏硬度测量分析系统
HMAS-C5/10/30/50SZA
自动维氏硬度测量分析系统
HMAS 硬度测量分析系统
MVSD -
5/10/30/50AEZ 视觉维氏硬度计
MVSD -
5/10/30/50AE 视觉维氏硬度计
HVI-5/10/20/30/40/50/100 传感器数显维氏硬度计
HVI-5/10/20/30/40/50/100Z 自动转塔传感器数显维氏硬度计
HVS5-50M
触摸屏维氏硬度计
HVS5-50MZ 触摸屏自动转塔维氏硬度计
HV5-50
维氏硬度计
HV5-50Z
自动转塔维氏硬度计
MVSS -
5/10/30/50AEZ 双视觉维氏硬度计
MVSS -
5/10/30/50AE 双视觉维氏硬度计
HVS-5
5公斤力数显维氏硬度计
HVS-5Z
5公斤力数显转塔维氏硬度计
HVS-10
10公斤力数显维氏硬度计
HVS-10Z
10公斤力数显转塔维氏硬度计
HVS-20
20公斤力数显维氏硬度计
HVS-20Z
20公斤力数显转塔维氏硬度计
HVS-30
30公斤力数显维氏硬度计
HVS-30Z
30公斤力数显转塔维氏硬度计
HVS-50
50公斤力数显维氏硬度计
HVS-50Z
50公斤力数显转塔维氏硬度计
HV-5
5公斤力维氏硬度计
HV-5Z
5公斤力自动转塔维氏硬度计
HV-10
10公斤力维氏硬度计
HV-10Z
10公斤力自动转塔维氏硬度计
HV-20
20公斤力维氏硬度计
HV-20Z
20公斤力自动转塔维氏硬度计
HV-30
30公斤力维氏硬度计
HV-30Z
30公斤力自动转塔维氏硬度计
HV-50
50公斤力维氏硬度计
HV-50Z
50公斤力自动转塔维氏硬度计
YHV-MZ
传感器自动转塔数显维氏硬度计系列
YHV-M
传感器数显维氏硬度计系列
FV
研究型维氏硬度计
HMAS-D5
维氏硬度计测量分析系统
HMAS-D5Z
维氏硬度计测量分析系统
HMAS-D5SM 维氏硬度计测量分析系统
HMAS-D5SMZ 维氏硬度计测量分析系统
HMAS-C5SZA 维氏硬度计测量分析系统
HMAS-HT
高温维氏硬度计测控系统
HMAS-LT
超低温维氏硬度计测控系统
IMAS
金属基复合材料压痕仪(断裂韧性和残余应力)
布氏硬度计 MC010系列
HBS-3000MV 视觉布氏硬度计
HBE-3000C 数显布氏硬度计
HBS-3000L 触摸屏布氏硬度计
HMAS-D3000HB 布氏硬度计测量分析系统
HMAS-HB
便携式布氏硬度测量分析系统
HBS-62.5M 触摸屏小负荷布氏硬度计
HBS-62.5MZ 触摸屏小负荷布氏硬度计
HB-2
锤击式布氏硬度计
HBE-3000A 电子布氏硬度计
HBS-62.5
触摸屏小负荷布氏硬度计
HBS-3000
数显布氏硬度计
HMAS-DHB
布氏硬度计测量分析系统
HMAS-DHBL 布氏硬度计测量分析系统
HBM-2017A 数显异形布氏硬度计
邵氏硬度计/巴氏硬度计/韦氏硬度计MC010系列
LX-A/D/C
邵氏橡胶硬度计
LXS-A/D/C
数显邵氏硬度计
HLX-A/C
邵氏硬度计支架
HLX-D
邵氏硬度计支架
HLXS-A/C
数显邵氏硬度计支架
HLXS-D
数显邵氏硬度计支架
934-1 巴氏硬度计
HBA-1 巴氏硬度计
W-20 韦氏硬度计
W-20A
铝合金韦氏硬度计
W-20B
铝合金韦氏硬度计
W-B75
铜合金(黄铜)韦氏硬度计
W-B75B
细管专用铜合金(黄铜)韦氏硬度计
W-BB75
铜合金(紫铜)韦氏硬度计
W-BB75B
细管专用铜合金(紫铜)韦氏硬度计
W-B92
不锈钢韦氏硬度计
进口硬度计
MIC10 超声波硬度计
MIC20
组合式超声波硬度计
TIV 便携式光学硬度计
TKM-459
超声波硬度计
DynaMIC
回弹硬度监测仪
DynaPOCKET 动态回弹硬度计
硬度计耗材/配件MC010系列
自准直仪/平面度检查仪MC030系列
金相切割机MC004系列
金相磨抛机MC004系列
金相镶嵌机MC004系列
CMAS清洁度检测分析系统
MMAS科研级工业自动显微镜测量系统
IMAS复合材料断裂韧性残余应力检测仪
BMAS材料气泡测量分析系统
金相显微镜
体视显微镜
生物显微镜
偏光显微镜/荧光显微镜
其它显微镜(工具/比较/进口)
电子万能试验机MC009系列
液压万能试验机MC009系列
冲击试验机MC009系列
光谱仪
元素分析仪/碳硫分析仪
色谱仪
光度计
影像测量仪
投影仪
三坐标测量机
轮廓仪
圆度仪
探伤仪
粗糙度仪
测高仪
测厚仪
测温仪
测振仪
石油化工仪器
气体检测仪
食品仪器
内窥镜
人工智能设备
4008127833/021-58391850
扫一扫关注我们
硬度计案例 硬度计技术
试验机案例 试验机技术
金相制样案例 金相制样技术
自准直仪案例 自准直仪技术
显微镜案例 显微镜技术
实验室保养 实验室搬迁
研润简介 研润发展历程
人才与招聘
研润旗下产品及公司简介
维氏硬度计 洛氏硬度计 硬度计
自准直仪 拉力试验机 硬度计
万能试验机 金相抛光机 硬度计
金相切割机 金相切割机 硬度计
圆度仪 轮廓仪 硬度计 硬度计
自准直仪 自准直仪 硬度计
显微镜 金相显微镜 硬度计
金相切割机 影像测量仪 硬度计
布氏硬度计 自准直仪 金相磨抛机
硬度计 自准直仪 硬度计,金相切割机
上海研润光机科技有限公司成立于2005年,是
一家以研发、生产、非标定制自动化检测设备,
计算机软件开发为主的高新技术企业。主导产品
光学和材料性能仪器,包括硬度计、试验机、显
微镜、金相制样、工业自动化流水线定制、非标
自动化质量控制检验、工业机器人、高精度光学
自准直仪、残余应力测试、复合材料测试等设备。
HRS-150F 传感器数显洛氏硬度计
HRS-150F Rockwell Hardness Tester supplied by CHWES. 0 key specifications available on request.
* Generated by rule engine over the product database; for pre-selection only.
Hardness testing presses an indenter into the surface under a constant load and converts indentation size or depth into a hardness value. Vickers uses a 136° diamond pyramid: HV = 0.1891 × F(N)/d²(mm), where d is the mean diagonal.
Hot hardness is performed in vacuum or high-purity inert gas. Specimen and indenter are heated independently and must be at the same temperature or corrected per the standard; loading, dwell and unloading all happen inside the hot zone, and the indentation is measured through a high-temperature optic or after cooling. The HMAS series uses a uniform hot zone with ±5 °C uniformity from 200 to 1600 °C.
1. Rockwell: HR = K − h/0.002 (K = 100 for HRC, 130 for HRB). At h = 0.078 mm, HRC = 61.
2. Brinell: HBW = 2F/(πD(D−√(D²−d²))); with F=1838.6 N, D=2.5 mm, d=1.1 mm, HBW ≈ 192.
3. Vickers: HV = 0.1891·F/d² (F in N); F=9.807 N with d=0.05 mm gives HV ≈ 742.
4. Test forces: choose Brinell loads by 0.045F/D²; Rockwell 10 kgf preliminary with 60/100/150 kgf total; surface scales 3 / 15/30/45 kgf.
5. Conversions: HRC ≈ HBW/10 only as a rough mid-range guide — official reports must follow the GB/T 1172 tables.
| Standard | Title | Scope |
|---|---|---|
| GB/T 4340.1-2009 | Vickers hardness test — test method | Vickers |
| GB/T 230.1-2018 | Rockwell hardness test | Rockwell |
| GB/T 231.1-2018 | Brinell hardness test | Brinell |
| ISO 6507-1 | Vickers hardness test | Export |
| ASTM E92 | Vickers hardness of metallic materials | Americas |
| GB/T 17394.1-2014 | Leeb hardness test | Portable |
Hot hardness has no unified national standard; ASTM E92 practice is normally cited with temperature, atmosphere, dwell and indenter material stated in the report.
1. Principle follows the target: Rockwell for macro hardness and heat-treatment acceptance; Brinell for cast iron, annealed and forged parts where a large indent is representative; Vickers or micro-Vickers for thin layers, coatings and small areas.
2. Bench or portable: bench units (HRC-150SMJ, HBRVS-187.5) where parts can be brought in; portable Leeb for large moulds, in-service piping and non-removable parts, corrected against a bench reference, typically within ±2 HRC.
3. One for many: mixed, low-volume shops do well with a Brinell-Vickers-Rockwell combination unit covering HRA/HRB/HRC/HV/HB.
4. Automation: manual below 100 parts per operator per day; motorised elevation, automatic loading and data upload (HRC-150SMJ) above 200 or for unattended runs.
5. Reference blocks: two to three blocks covering the working range, checked every shift and sent for annual calibration.
6. Specimen requirements: Rockwell needs thickness at least ten times the indent depth and Ra ≤1.6 µm; otherwise switch to Vickers or superficial Rockwell.
| Model | Principle | Range | Typical use |
|---|---|---|---|
| HRC-150SMJ | Rockwell, motorised digital | HRA/HRB/HRC | Batch sampling in heat treatment |
| HRC-150SM / HRC-150M | Rockwell | HRA/HRB/HRC | Incoming and in-process checks |
| HRC-45M | Superficial Rockwell | 15N/30N/45N | Sheet, plating, case layers |
| HRS-150M / XHRS-150M | Digital Rockwell | HRA/HRB/HRC | Lines needing data upload |
| HBRVS-187.5 | Brinell-Vickers-Rockwell | HBW/HRA/HRB/HRC/HV | Mixed low-volume production |
Three rules for trustworthy data: check the reference block every shift and record it; keep the support face flat and clean; keep indent spacing at least three indent diameters.
Specimen. Test and support faces parallel; thickness at least 1.5 × diagonal (Vickers) or 10 × depth (Rockwell); Ra ≤ 0.4 µm, free of scale and oil.
Room temperature. Select load, apply within 10–15 s, dwell 10–15 s, unload, measure diagonals. Spacing between indentations ≥3d, from the edge ≥2.5d.
Hot hardness. Load the specimen, evacuate or backfill argon, ramp and soak 20–30 min, lower the indenter, load and dwell, unload, cool or measure hot, then apply the temperature correction.
Gradient. Step every 0.05–0.1 mm to the hardness plateau; determine effective case depth at 550 HV1 per GB/T 9450.
Quality control. Check a certified block (e.g. 700 HV1) each shift, recalibrate beyond ±3%, and log furnace curves and atmosphere for hot tests.