CHWES dự hội nghị đo lường độ cứng toàn quốc 2026
Đội kỹ thuật trình bày báo cáo về truy nguyên độ cứng nhiệt độ cao.

About the seminar
The 2026 National Hardness Metrology Seminar was held in Xi'an in May, gathering over 200 delegates from provincial metrology institutes, universities and hardness-tester manufacturers. The CHWES technical department presented a report titled Three Challenges in High-Temperature Hardness Traceability, covering reference-block stability at elevated temperatures, the influence of indenter materials (sapphire, boron carbide, diamond) on readings, and temperature-uniformity corrections above 800 °C.
Exchanges and takeaways
During the seminar the company reached consensus with several institutes on a simplified intermediate check for microhardness testers: a three-point check on an HV0.3 reference block plus diagonal-image comparison, cutting daily verification to under fifteen minutes. On Leeb conversion disputes, the company's proposal of plant-specific conversion tables built on same-lot reference blocks drew positive responses from user organizations.
Next steps
Twelve common requirements collected at the seminar will enter the 2027 product improvement list, including online indenter temperature sensing for hot hardness testers and digital certificate management for hardness blocks. Technical details will be released as white papers on the company website.



