Ô tô2024

Đo tự động 48 lỗ trên tấm van hộp số

YR4030CNC đo 48 lỗ một lần gá, sai số ±(3+L/200) µm, 3 phút thay vì 25 phút.

Công ty
Nhà máy hộp số tự động, Đông Trung Quốc
Địa chỉ
Tô Châu, Giang Tô
Danh mục
Máy đo ảnh
Đo tự động 48 lỗ trên tấm van hộp số
25 → 3 minThời gian/chi tiết
±(3+L/200) μmSai số chỉ thị

The plant makes automatic-transmission valve plates with 48 holes of 3-12 mm diameter and a position tolerance of 0.05 mm. A manual vision machine measured hole by hole in 25 minutes per piece, and operator probing differences pushed GR&R above 20%.

Solution: a YR4030CNC fully automatic vision measuring machine with 0.5 µm scales, motorised zoom optics and a programmable four-ring light. After calibration to JJF 1318 the X/Y indication error is ±(3+L/200) µm. One clamping completes circle fitting for all 48 holes with automatic datum alignment, and the software outputs position values with pass/fail judgement.

Result: three minutes per piece, repeatability within 1.5 µm and GR&R down to 8%; trend charts revealed a 0.02 mm drift on spindle 2 of the drilling line, and after compensation the scrap rate fell from 1.8% to 0.3%.

Benefit: inspection now matches line takt, saving about CNY 460,000 per year in scrap and rework.

⇄0So sánhSo sánh thông số