Thin-wall parts2024

Surface hardness of nitrided thin-wall cylinders with superficial Rockwell

HRC-45M at 15N reduces indent depth from 80 to 18 µm, leaving thin walls undistorted and matching Vickers conversion within 1.5 HRC.

Công ty
Hydraulic components plant, Hubei
Địa chỉ
Xiangyang, Hubei
Surface hardness of nitrided thin-wall cylinders with superficial Rockwell
80 → 18 μmIndent depth
≤1.5 HRCVs. HV1
40 → 22 sCycle

Cylinders have 3.5 mm walls and a 0.25 mm nitrided case. Standard Rockwell at 150 kg drove the indent 80 µm deep, a third of the case, denting the thin wall and reading low.

Solution: HRC-45M superficial Rockwell at 15N (147 N total), giving an 18 µm indent well inside the case; HV1 on HBRVS-187.5 was used as a cross-check to build a plant conversion table.

Result: 18 µm indents with no distortion, conversion within 1.5 HRC of HV1 versus 4 HRC previously, cycle time down from 40 to 22 seconds, and no more extra bosses left just for hardness testing.

⇄0So sánhSo sánh thông số