Ô tô2025

CMM xưởng DuraMax đo vỏ điện

CMM DuraMax ở 15-40°C kiểm 100% vỏ điện; cảnh báo sớm 2 ca, phế phẩm giảm 380 nghìn tệ/tháng.

Công ty
Nhà máy vỏ điện, Nam Trung Quốc
Địa chỉ
Thâm Quyến, Quảng Đông
CMM xưởng DuraMax đo vỏ điện
15~40 ℃Dải nhiệt độ
120PPM khách hàng

The plant makes 12000 e-drive housings a month with 0.04 mm coaxiality between stator bore and bearing seats. The metrology lab sampled five parts per shift, so drift was often found only after two shifts of bad parts had run - a 380000-yuan monthly scrap loss.

Solution: a DuraMax shop-floor CMM installed beside the machining line, with active temperature compensation over 15-40°C and a passive anti-vibration base against press vibration. Eighteen critical dimensions - stator bore, bearing seats, sealing face - run as a full-inspection program with robotic loading at a 6-minute cycle.

Results: 100% inspection of critical dimensions with SPC trends fed straight to the line, giving drift warnings two shifts earlier. Monthly scrap fell below 60000 yuan and customer PPM dropped from 850 to 120.

⇄0So sánhSo sánh thông số