Bán dẫn2023

Đo độ đồng phẳng chân và bề rộng gân khung chân

YR-100I đo gân 0,15 mm và độ đồng phẳng chân, lặp lại ≤2 µm.

Công ty
Nhà máy đóng gói bán dẫn, Đông Trung Quốc
Địa chỉ
Thượng Hải
Danh mục
Máy đo ảnh
Đo độ đồng phẳng chân và bề rộng gân khung chân
≤2 μmĐộ lặp lại
8 → ≤1 μmChênh lệch người đo

The plant stamps QFP lead frames with a 0.15 mm web width and a coplanarity requirement within 0.05 mm. Visual readings on a toolmaker microscope differed by up to 8 µm between two inspectors, and a customer audit challenged the data.

Solution: a YR-100I vision measuring machine with a 10× objective and coaxial incident light, 0.1 µm reading resolution. The coordinate system is built on datum holes, web width is measured by automatic edge detection, and Z auto-focus takes the highest point of each pin to fit the coplanarity datum plane.

Result: web-width repeatability within 2 µm and 90 seconds per frame for coplanarity; the difference between inspectors dropped below 1 µm, with raw images attached to every report.

Benefit: the customer audit passed, and die maintenance shifted from experience to trend data, cutting monthly die repairs by 30%.

⇄0So sánhSo sánh thông số