Luyện kim thép2023

Độ cứng nóng trục cán thép gió ở 600℃

HMAS-HT800 phân loại trục cán theo độ cứng nóng 600℃.

Công ty
Nhà máy trục cán, Bắc Trung Quốc
Địa chỉ
Hà Bắc
Độ cứng nóng trục cán thép gió ở 600℃
+22%Tăng sản lượng cán

HSS work rolls with identical room-temperature hardness behaved very differently in hot strip mills; complaints centered on spalling and early wear.

Solution: HMAS-HT800 makes five 10 kgf indents at 600℃ (near roll-surface working temperature) on the end test ring of every roll, 15 s dwell, HV10 per GB/T 4340.1; a 600℃ retention ratio ≥55% is set as the Grade-A shipping threshold.

Result: Grade-A rolls achieved 22% higher average tonnage and spalling complaints fell 80%. Red-hardness data is now printed on the quality certificate as a settlement index with the mill.

⇄0So sánhSo sánh thông số