Phụ tùng ô tô2023

CMM Daisy đo vị trí lỗ vỏ hộp số

CMM Daisy ±(1,9+L/300) um kiểm vị trí lỗ 0,03 mm; Cpk tăng từ 1,05 lên 1,67.

Công ty
Nhà máy đúc vỏ hộp số, Tây Nam Trung Quốc
Địa chỉ
Trùng Khánh
CMM Daisy đo vị trí lỗ vỏ hộp số
0.03 mmDung sai vị trí
1.67Cpk vị trí

Bearing bores of the transmission housing carry a 0.03 mm position requirement. Indirect checks with mandrels and a roundness tester accumulated conversion errors and could not capture position at all; trial-assembly noise reached 2.8%.

Solution: a Daisy bridge CMM with MPE E=±(1.9+L/300) um and a scanning probe, sampling 3 sections per bore at 120 points each. After fitting the bore-pattern datum frame, position, coaxiality and centre distances are graded per GB/T 1958, with full first-article layout in 40 minutes.

Results: measured bore position of 0.018-0.026 mm with Cpk raised from 1.05 to 1.67. After two die inserts were corrected from the measurement data, trial-assembly noise fell from 2.8% to 0.3%, saving about 600 hours of teardown rework a year.

⇄0So sánhSo sánh thông số