Chế tạo hàng không2024

Cân chỉnh dầm chuẩn đồ gá 12 m

MC030-LD500/80/0.3 chỉnh dầm chuẩn 12 m, độ thẳng 0,06 mm.

Công ty
Nhà máy lắp ráp máy bay, Tây Nam Trung Quốc
Địa chỉ
Tứ Xuyên
Cân chỉnh dầm chuẩn đồ gá 12 m
0.06 mm / 12 mĐộ thẳng dầm

The 12 m cast-aluminum datum beam of a new wing jig sagged at mid-span; accumulated locator error would have exceeded the 0.15 mm acceptance limit.

Solution: MC030-LD500/80/0.3 (±0.3 arcsec error, ±500 arcsec range) measured both planes every 500 mm in a temperature-controlled shop; software output the deflection curve and 3-point support adjustments.

Result: after two adjustment rounds the beam reached 0.06 mm straightness over 12 m, and locator cumulative deviation was 0.09 mm. The jig passed acceptance without a 20-day teardown.

⇄0So sánhSo sánh thông số