Chế tạo hàng không2025

HXZMP-1000Z kiểm dòng kim loại và vùng hạt thô

HXZMP-1000Z ăn mòn kiềm thấy rõ dòng kim loại và vành hạt thô 0,8 mm trên phôi 7075; lô tranh chấp giảm từ 8 còn 1 mỗi năm.

Công ty
Nhà máy rèn hàng không, Tây Nam Trung Quốc
Địa chỉ
Đức Dương, Tứ Xuyên
HXZMP-1000Z kiểm dòng kim loại và vùng hạt thô
0.8 mmĐộ sâu vành hạt thô
18 minThời gian chuẩn bị

7075 aerospace forgings are accepted per GJB on flow-line continuity and coarse-grain ring depth. Hand-ground macro samples kept scratches, and after caustic etch two inspectors could reach different verdicts - eight disputed batches a year needed third-party re-tests.

Solution: an HXZMP-1000Z automatic grinder-polisher with programmed pressure and speed, grinding to 1200 grit then a 3 um polish for a scratch-free surface; etching in 20% NaOH at 70°C for 90 s gives uniform contrast of flow lines and the coarse ring.

Results: the 0.8 mm coarse-grain ring is clearly measurable and cut-flow criteria are unified; disputed batches fell to one a year. Macro prep time per piece dropped from 50 to 18 minutes, saving about 400000 yuan of third-party re-testing annually.

⇄0So sánhSo sánh thông số