WEW-1000D Hydraulic Universal Testing Machine

Hydraulic Universal Testing Machine

型番WEW-1000D
  • 最大试验力1000KN
  • 测试范围50-1000KN
  • 测试准确度±1%或±0.5%
  • 实验力分辨率0.01KN

By submitting you agree to our privacy policy.

01

製品概要

WEW系列液压式万能试验机用于金属、非金属材料之拉伸、压缩、弯曲等力学性能试验,增加剪切附具可做剪切试验。 本机配有计算机、打印机、电子引伸计、光电编码器及通用试验软件,可以准确测定金属材料的抗拉强度、屈服强度、规定非比例延伸强度、延伸率、弹性模量等力学性能。试验结果可以查询和打印(力-位移,力-变形,应力-位移,应力-变形,力-时间,变形-时间) 六种曲线及相关试验数据,具有软件自检功能,能自诊断故障。是工矿企业、科研单位、大专院校、工程质量监督站等部门的理想检测设备。
油缸采用:下置式主机,拉伸空间位于主机的上方,压缩、弯曲试验空间位于主机下横梁和工作台之间。
传动系统采用:下横梁升降电机经减速器、链传动机构、丝杠副传动,实现拉伸、压缩空间的调整。
液压系统采用:油箱内的油经过过滤油网被吸入油泵后,经油泵的输油管送到送油阀内,当送油手轮关闭时,由于油压作用而将活塞推开,油从回油管流回油箱,当送油手轮打开时,则油液经由油管进入工作油缸内,再通过压力油管经过回油阀体流回油箱。
控制系统采用:微机控制,电脑显示材料特性,实验数据方便直观;
保护系统采用:当试验力超过最大试验力的3%时,过载保护,油泵电机停机;当活塞升起达到上极限位置时,行程保护,油泵电机停机。
二. WEW-D系列电脑液压式万能试验机性能特点:
1.下置式主机,高度低、重量轻,性价比高。
2.四立柱主机
3.支持进行拉伸、压缩、剪切、弯曲等试验;
4.支持开放编辑试验、编辑标准和编辑步骤,并支持导出导入试验、标准和步骤
5.过载保护和行程保护,有效保护电机的正常运转。
6.支持试验参数自定义
7.采用开放式的EXCEL报表形式,支持用户自定义报表格式;
8.查询打印试验结果灵活方便,支持打印多个试样,自定义排序打印项目;
9.程序支持分级管理两级(管理员、试验员)用户管理权限
10.可定制试验机主机颜色。
三. WEW-D系列液压式万能试验机技术特征:
产品型号MC009
WEW-1000D
最大试验力
1000KN
测试范围
50-1000KN
测试准确度
±1%或±0.5%
实验力分辨率
0.01KN
位移测量分辨率
0.01mm
变形测量精度
0.01mm
拉伸空间
750
压缩空间
380
活塞行程
150
圆试样钳口夹持直径
Φ13-Φ40
扁试样钳口夹持厚度
0-15
扁试样最大夹持宽度
75
选配剪切试样尺寸
10mm
压盘尺寸
φ160mm或选配204X204mm
弯曲试验两点间距离
450
弯曲支滚宽度
140
弯曲支滚直径
Φ40
最大弯曲度
150
活塞最大移动速度
50mm/min
夹紧方式
液压自动夹紧
圆试样拉伸钳口
Φ13-Φ26、Φ26-Φ40
扁试样拉伸钳口
0-15
压缩附具
φ160mm
弯曲附具
试验两支点间最大距离450
油泵及横梁电机功率
1.1及0.75千瓦
主机外形尺寸
900×710×2250
测力柜外形尺寸
1000×700×1400
重量
3250kg

WEW-1000D Hydraulic Universal Testing Machine supplied by CHWES. 12 key specifications available on request.

02

仕様

最大试验力1000KN
测试范围50-1000KN
测试准确度±1%或±0.5%
实验力分辨率0.01KN
位移测量分辨率0.01mm
变形测量精度0.01mm
拉伸空间750
压缩空间380
活塞行程150
圆试样钳口夹持直径Φ13-Φ40
扁试样钳口夹持厚度0-15
扁试样最大夹持宽度75

* Generated by rule engine over the product database; for pre-selection only.

03

測定原理

A universal testing machine comprises the load frame, drive system, load cell, displacement/extensometer measurement and closed-loop control. A servo motor and screw drive the crosshead (or a servo valve drives the actuator); the load cell converts force to a signal, the extensometer measures strain over the gauge length, and the controller follows the programmed rate while logging force–displacement–strain.

Software derives upper and lower yield strength (ReH/ReL), tensile strength Rm, elongation A, reduction of area Z and modulus E. Control modes include speed, force, displacement and strain; GB/T 228.1-2021 requires strain control in the yield region (method A) for lower uncertainty.

  • Electromechanical: 1–600 kN for metals, plastics and composites.
  • Servo-hydraulic: 300–2000 kN for high-strength steel, fasteners and bars.
  • Specialised: friction and wear, impact, bend, peel.
04

Process animation

  1. Measure width and thickness (or diameter) at three points; compute S₀.
  2. Clamp with wedge or hydraulic grips, aligned to avoid bending.
  3. Extensometer attached to the gauge length, zeroed.
  4. Load: speed control in the elastic range, strain control at yield, speed control in hardening.
  5. Fracture: detect peak and break, stop.
  6. Report: ReH/ReL/Rm/A/Z with curves and data tables.
0102030405
05

Calculation & formulas

1. Tensile strength: Rm = Fmax/S0; a 10 mm bar (S0=78.5 mm²) breaking at 62.8 kN gives Rm ≈ 800 MPa.

2. Yield: Rp0.2 is interpolated from the extensometer curve at 0.2% non-proportional extension.

3. Elongation & reduction: A = (Lu−L0)/L0; Z = (S0−Su)/S0; L0=50, Lu=62.5 mm → A = 25%.

4. Friction coefficient: μ = F/N; at N = 100 N and F = 32 N, μ = 0.32. Four-ball results report PB (last non-seizure) and PD (weld) loads.

5. Wear rate: k = V/(F·s); obtain V from Δm/ρ. Typical specific wear rates run 10⁻⁸–10⁻⁶ mm³/(N·m).

06

規格

StandardTitleScope
GB/T 228.1-2021Metallic materials — tensile testing, room temperatureTension
ISO 6892-1Tensile testing at room temperatureExport projects
ASTM E8/E8MTension testing of metallic materialsAmericas
GB/T 7314-2017Compression testing at room temperatureCompression
GB/T 232-2010Bend testing of metallic materialsBending
GB/T 3098.1-2010Mechanical properties of fastenersFasteners
07

選定ガイド

1. Frame capacity plus 20–30%: Φ32 rebar yields near 630 kN so choose 1000 kN; M30 proof load is about 550 kN so choose 600–1000 kN. Running at full scale accelerates load-cell fatigue.

2. Servo-hydraulic or electromechanical: ≥300 kN with high stiffness and long stroke (rebar, bolts, concrete) needs servo-hydraulic (WAW/WEW); ≤300 kN with tight speed control (plastics, composites) suits electromechanical frames (WDS).

3. Display, digital or PC-controlled: a digital readout for single values; PC control (the -C suffix) for stress-strain curves, reports and batch data.

4. Fixtures often matter more than the frame: ribbed grips for rebar, proof-load fixtures for bolts, wrap grips for cables. Poor alignment costs 2–3 percentage points of elongation.

5. Extensometers and options: contact or video extensometers for modulus, high-temperature furnaces and extensometers, large platens with displacement control for battery crush.

6. Foundation and safety: a 1000 kN frame needs an isolated concrete base, guard doors and e-stops; hydraulic units need oil-temperature management.

SeriesTypeForce rangeTypical specimens
WDS-1G to 300GElectromechanical1–300 kNPlastics, composites, small parts
WEW-100D to 1000DHydraulic, digital100–1000 kNRebar, bolts, metals
WEW-300C to 2000CHydraulic, PC300–2000 kNHigh-strength bolts, forgings
WAW-100 to 1000Servo-hydraulic100–1000 kNRate-controlled acceptance
WAW-300C to 2000CServo-hydraulic, PC300–2000 kNBridges, nuclear components
WES-300C to 2000CCompression300–2000 kNConcrete, blocks
MMW-1A / MRS-10WFriction and wear—Lubricants, coatings

Three acceptance checks: verify force at 20/50/80% with a standard load cell; check alignment so a standard specimen breaks mid-gauge; run three identical specimens and look at scatter.

08

試験方法

Specimen. Proportional (L₀ = 5.65√S₀) or non-proportional specimens to GB/T 228.1; transition radius R ≥ 5 mm; Ra ≤ 1.6 µm with work-hardened layers removed.

Measurement. Width and thickness at three positions within the gauge length, use the minimum for S₀; below 1 mm use optical or 0.001 mm micrometers.

Loading. 5–30 MPa/s in the elastic range, 0.00025/s strain rate at yield per method A, up to 0.0067/s in hardening; log at 100 Hz or more to catch yield serrations.

Evaluation. ReH is the first peak, ReL the lowest point, Rm the maximum force over S₀, A from the final gauge length (offset method), Z from the minimum fracture diameter.

Quality control. Daily check with a reference specimen, monthly force calibration with a class 0.3 proving instrument, half-yearly extensometer calibration, 23 ± 5 °C.

09

Industry applications

  • Construction and bridges: rebar tensile and bend, high-strength bolt wedge load, strand relaxation, concrete compression, with loading-rate control to GB/T 228.1 and GB/T 3098.1.
  • Metals and forgings: room and elevated temperature tensile, yield strength, elongation and reduction of area for material verification.
  • Automotive parts: chassis tension-compression, suspension springs, seat-belt anchorages, battery-pack crush with dedicated fixtures.
  • Fasteners: proof load, nut proof load, washer elasticity; fixture alignment drives scatter.
  • Plastics and composites: tension, flexure, compression and shear on low-force frames (WDS) with non-contact extensometers.
  • Cables and ropes: breaking force and elongation with long stroke and large-deformation grips.
  • Friction and wear: MMW/MRS four-ball, reciprocating and ring-block tests for lubricants and coatings.
  • Third-party testing: calibrated frames with tamper-evident data and raw curve export.
10

Price and lead time for this model

By submitting you agree to our privacy policy.

⇄0比較仕様比較