WAW100-1000B Electro-hydraulic Servo Universal Testing Machine

Electro-hydraulic Servo Universal Testing Machine

型番WAW100-1000B
  • 最大试验力100KN / 300KN / 600KN / 1000KN
  • 测试范围2-100KN / 6-300KN / 12-600KN / 20-1000KN
  • 测试准确度±1%或±0.5%
  • 实验级别1级或0.5级

By submitting you agree to our privacy policy.

01

製品概要

WAW-BG系列电液伺服万能试验机用于各种金属、非金属材料的拉伸、压缩、弯曲和剪切试验,以及一些产品的特殊试验,适用于冶金、建筑、轻工、航空、航天、材料、大专院校、科研单位等领域。
油缸采用:间隙密封,下置式主机,拉伸空间位于主机的上方,压缩、弯曲试验空间位于主机下横梁和工作台之间。
传动系统采用:下横梁升降电机经减速器、链传动机构、丝杠副传动,实现拉伸、压缩空间的调整。
液压系统采用:油箱内的液压油通过电机带动高压泵进入油路,流经单向阀、高压滤油器、压差阀组、伺服阀,进入油缸。计算机发出控制信号到伺服阀,控制伺服阀的开口和方向,从而控制进入油缸的流量,实现等速试验力、等速位移等的控制。
控制系统采用:实现了试验力、试样变形、横梁位移和试验进程的四种闭环控制;高分辨率达1/500000,全程不分档。
保护系统采用:当试验力超过最大试验力的3%时,过载保护,油泵电机停机;当活塞升起达到上极限位置时,行程保护,油泵电机停机。
二. WAW-BG系列电液伺服万能试验机性能特点:
1.下置式主机。
2.闭环控制。
3.高精度A/D模组,最高分辨率达1/500000,全程不分档。
4.过载保护和行程保护,有效保护电机的正常运转。
5.简单、可靠、稳定的液压系统。
6.测力范围高达2%-100%FS。
7.可定制试验机主机颜色。
三. WAW-BG系列电液伺服万能试验机技术特征:
产品型号MC009
WAW-100
WAW-300
WAW-600
WAW-1000
最大试验力
100KN
300KN
600KN
1000KN
测试范围
2-100KN
6-300KN
12-600KN
20-1000KN
测试准确度
±1%或±0.5%
实验级别
1级或0.5级
实验力分辨率
0.002KN
位移测量分辨率
0.01mm
变形测量精度
0.005mm
恒力、恒变形、恒位移控制范围
0.4%~100%FS
恒力、恒变形、恒位移控制精度
设定值小于10%FS时,设定值的±1.0%以内;设定值≥10%FS时,设定值的±0.5%以内
拉伸空间
550
650
700
压缩空间
380
550
600
活塞行程
150
200
圆试样钳口夹持直径
Φ6-Φ26
Φ13-Φ40
Φ13-Φ60
扁试样钳口夹持厚度
0-12
0-15
0-30
弯曲试验两点间距离
350
弯曲支滚宽度
100
140
弯曲支滚直径
Φ30
最大弯曲度
150
活塞最大移动速度
50mm/min
夹紧方式
手动夹紧
液压夹紧
主机外形尺寸
720×580×1850
850×580×2150
1050×660×2250
油源外形尺寸
950×700×1150
重量
1550kg
2150kg
2350kg
3250kg

WAW100-1000B Electro-hydraulic Servo Universal Testing Machine supplied by CHWES. 23 key specifications available on request.

02

仕様

最大试验力100KN / 300KN / 600KN / 1000KN
测试范围2-100KN / 6-300KN / 12-600KN / 20-1000KN
测试准确度±1%或±0.5%
实验级别1级或0.5级
实验力分辨率0.002KN
位移测量分辨率0.01mm
变形测量精度0.005mm
恒力、恒变形、恒位移控制范围0.4%~100%FS
恒力、恒变形、恒位移控制精度设定值小于10%FS时,设定值的±1.0%以内;设定值≥10%FS时,设定值的±0.5%以内
拉伸空间550 / 650 / 700
压缩空间380 / 550 / 600
活塞行程150 / 200
圆试样钳口夹持直径Φ6-Φ26 / Φ13-Φ40 / Φ13-Φ60
扁试样钳口夹持厚度0-12 / 0-15 / 0-30
弯曲试验两点间距离350
弯曲支滚宽度100 / 140
弯曲支滚直径Φ30
最大弯曲度150
活塞最大移动速度50mm/min
夹紧方式手动夹紧 / 液压夹紧
主机外形尺寸720×580×1850 / 850×580×2150 / 1050×660×2250
油源外形尺寸950×700×1150
重量1550kg / 2150kg / 2350kg / 3250kg

* Generated by rule engine over the product database; for pre-selection only.

03

測定原理

A universal testing machine comprises the load frame, drive system, load cell, displacement/extensometer measurement and closed-loop control. A servo motor and screw drive the crosshead (or a servo valve drives the actuator); the load cell converts force to a signal, the extensometer measures strain over the gauge length, and the controller follows the programmed rate while logging force–displacement–strain.

Software derives upper and lower yield strength (ReH/ReL), tensile strength Rm, elongation A, reduction of area Z and modulus E. Control modes include speed, force, displacement and strain; GB/T 228.1-2021 requires strain control in the yield region (method A) for lower uncertainty.

  • Electromechanical: 1–600 kN for metals, plastics and composites.
  • Servo-hydraulic: 300–2000 kN for high-strength steel, fasteners and bars.
  • Specialised: friction and wear, impact, bend, peel.
04

Process animation

  1. Measure width and thickness (or diameter) at three points; compute S₀.
  2. Clamp with wedge or hydraulic grips, aligned to avoid bending.
  3. Extensometer attached to the gauge length, zeroed.
  4. Load: speed control in the elastic range, strain control at yield, speed control in hardening.
  5. Fracture: detect peak and break, stop.
  6. Report: ReH/ReL/Rm/A/Z with curves and data tables.
0102030405
05

Calculation & formulas

1. Tensile strength: Rm = Fmax/S0; a 10 mm bar (S0=78.5 mm²) breaking at 62.8 kN gives Rm ≈ 800 MPa.

2. Yield: Rp0.2 is interpolated from the extensometer curve at 0.2% non-proportional extension.

3. Elongation & reduction: A = (Lu−L0)/L0; Z = (S0−Su)/S0; L0=50, Lu=62.5 mm → A = 25%.

4. Friction coefficient: μ = F/N; at N = 100 N and F = 32 N, μ = 0.32. Four-ball results report PB (last non-seizure) and PD (weld) loads.

5. Wear rate: k = V/(F·s); obtain V from Δm/ρ. Typical specific wear rates run 10⁻⁸–10⁻⁶ mm³/(N·m).

06

規格

StandardTitleScope
GB/T 228.1-2021Metallic materials — tensile testing, room temperatureTension
ISO 6892-1Tensile testing at room temperatureExport projects
ASTM E8/E8MTension testing of metallic materialsAmericas
GB/T 7314-2017Compression testing at room temperatureCompression
GB/T 232-2010Bend testing of metallic materialsBending
GB/T 3098.1-2010Mechanical properties of fastenersFasteners
07

選定ガイド

1. Frame capacity plus 20–30%: Φ32 rebar yields near 630 kN so choose 1000 kN; M30 proof load is about 550 kN so choose 600–1000 kN. Running at full scale accelerates load-cell fatigue.

2. Servo-hydraulic or electromechanical: ≥300 kN with high stiffness and long stroke (rebar, bolts, concrete) needs servo-hydraulic (WAW/WEW); ≤300 kN with tight speed control (plastics, composites) suits electromechanical frames (WDS).

3. Display, digital or PC-controlled: a digital readout for single values; PC control (the -C suffix) for stress-strain curves, reports and batch data.

4. Fixtures often matter more than the frame: ribbed grips for rebar, proof-load fixtures for bolts, wrap grips for cables. Poor alignment costs 2–3 percentage points of elongation.

5. Extensometers and options: contact or video extensometers for modulus, high-temperature furnaces and extensometers, large platens with displacement control for battery crush.

6. Foundation and safety: a 1000 kN frame needs an isolated concrete base, guard doors and e-stops; hydraulic units need oil-temperature management.

SeriesTypeForce rangeTypical specimens
WDS-1G to 300GElectromechanical1–300 kNPlastics, composites, small parts
WEW-100D to 1000DHydraulic, digital100–1000 kNRebar, bolts, metals
WEW-300C to 2000CHydraulic, PC300–2000 kNHigh-strength bolts, forgings
WAW-100 to 1000Servo-hydraulic100–1000 kNRate-controlled acceptance
WAW-300C to 2000CServo-hydraulic, PC300–2000 kNBridges, nuclear components
WES-300C to 2000CCompression300–2000 kNConcrete, blocks
MMW-1A / MRS-10WFriction and wear—Lubricants, coatings

Three acceptance checks: verify force at 20/50/80% with a standard load cell; check alignment so a standard specimen breaks mid-gauge; run three identical specimens and look at scatter.

08

試験方法

Specimen. Proportional (L₀ = 5.65√S₀) or non-proportional specimens to GB/T 228.1; transition radius R ≥ 5 mm; Ra ≤ 1.6 µm with work-hardened layers removed.

Measurement. Width and thickness at three positions within the gauge length, use the minimum for S₀; below 1 mm use optical or 0.001 mm micrometers.

Loading. 5–30 MPa/s in the elastic range, 0.00025/s strain rate at yield per method A, up to 0.0067/s in hardening; log at 100 Hz or more to catch yield serrations.

Evaluation. ReH is the first peak, ReL the lowest point, Rm the maximum force over S₀, A from the final gauge length (offset method), Z from the minimum fracture diameter.

Quality control. Daily check with a reference specimen, monthly force calibration with a class 0.3 proving instrument, half-yearly extensometer calibration, 23 ± 5 °C.

09

Industry applications

  • Construction and bridges: rebar tensile and bend, high-strength bolt wedge load, strand relaxation, concrete compression, with loading-rate control to GB/T 228.1 and GB/T 3098.1.
  • Metals and forgings: room and elevated temperature tensile, yield strength, elongation and reduction of area for material verification.
  • Automotive parts: chassis tension-compression, suspension springs, seat-belt anchorages, battery-pack crush with dedicated fixtures.
  • Fasteners: proof load, nut proof load, washer elasticity; fixture alignment drives scatter.
  • Plastics and composites: tension, flexure, compression and shear on low-force frames (WDS) with non-contact extensometers.
  • Cables and ropes: breaking force and elongation with long stroke and large-deformation grips.
  • Friction and wear: MMW/MRS four-ball, reciprocating and ring-block tests for lubricants and coatings.
  • Third-party testing: calibrated frames with tamper-evident data and raw curve export.
10

Price and lead time for this model

By submitting you agree to our privacy policy.

⇄0比較仕様比較