よくある質問

よくある質問

選定ガイド · 試験方法

Metallurgical, stereo or toolmaker microscope?

Microstructure and case depth: metallurgical. Fractures and assembly: stereo. Geometry such as holes and threads: toolmaker or vision system.

When to use brightfield, darkfield, polarised light or DIC?

Brightfield for routine structure; darkfield for cracks and second-phase edges; polarised light for anisotropic phases; DIC for low-relief steps such as case-depth transitions.

How do numerical aperture and resolution relate?

δ = 0.61λ/NA. Higher NA gives better resolution but shallower depth of field and shorter working distance. Match total magnification to about 500–1000× NA.

Why do 100× objectives need immersion oil?

Air limits NA to about 0.95; oil with n=1.515 allows NA 1.4 and roughly 1.5× better resolution. Clean the lens immediately after use.

Is a higher-resolution camera always better?

No. Pixels should match the objective resolution (Nyquist). Over-sampling only magnifies noise and lowers frame rate.

⇄0比較仕様比較