HOT
YR-01X · 2026-11-17 · +86 21 5748 2007
YR-01X Photoelectric Autocollimator
Photoelectric Autocollimator
By submitting you agree to our privacy policy.
Overview
自准直仪/平面度检查仪MCO30系列
MC030-MAT200/38/1 光电自准直仪(10米1秒)
MC030-MAT200/38/0.5 光电自准直仪(10米0.5秒)
MC030-MAT200/48/1 光电自准直仪(20米1秒)
MC030-MAT200/48/0.5 光电自准直仪(20米0.5秒)
MC030-MAT300/48/1 光电自准直仪(30米1秒)
MC030-MAT300/48/0.5 光电自准直仪(30米0.5秒)
MC030-MAT300/48/0.3 光电自准直仪(30米0.3秒)
MC030-MAT300/48/0.2 光电自准直仪(30米0.2秒)
MC030-MAT300/48/0.1 光电自准直仪(30米0.1秒)
MC030-LD350/60/1 光电自准直仪(40米1秒)
MC030-LD350/60/0.5 光电自准直仪(40米0.5秒)
MC030-LD350/60/0.3 光电自准直仪(40米0.3秒)
MC030-LD400/68/1 光电自准直仪(50米1秒)
MC030-LD400/68/0.5 光电自准直仪(50米0.5秒)
MC030-LD400/68/0.3 光电自准直仪(50米0.3秒)
MC030-LD500/80/0.3 光电自准直仪(80米0.3秒)
MC030-LD500/80/0.2 光电自准直仪(80米0.2秒)
MC030-ZJUH2000/0.3 光电自准直仪(10米0.3秒)
MC030-ZJUH3000/0.3 光电自准直仪(30米0.3秒)
MC030-ZJUH3000/0.2 光电自准直仪(30米0.2秒)
MC030-ZJUH3000/0.1 光电自准直仪(30米0.1秒)
MC030-ZJUH3000 光电自准直仪
MC030-ZJ3000U 光电自准直仪
MC030-ZJ3000W 光电自准直仪
MC030-ZJUH5000/0.2 光电自准直仪(50米0.2秒)
MC030-ZJUH5000/0.1 光电自准直仪(50米0.1秒)
MC030-ZJHS200-200HZ 光电自准直仪
MC030-ZJPX200-2350HZ 光电自准直仪
MC030-ZJPX300-2350HZ 光电自准直仪
MC030-WF100-6000 光电自准直仪
MC030-WF100-10800 光电自准直仪
MC030-WF200-5700 光电自准直仪
MC030-MCE200X2 光电自准直仪
MC030-JG50 激光自准直仪
MC030-JG100 激光自准直仪
MC030-ZJQFCJY-1 自动电子测角仪
MC030-FDTCJY-0.3 手动测角仪
YRMAT1510 光电自准直仪(10米1秒)
YRMAT1815 光电自准直仪(15米1秒)
YRMAT2020 光电自准直仪(20米1秒)
YRMAT3025 光电自准直仪(25米1秒)
YRMAT3030 光电自准直仪(30米1秒)
YRMAT3068M 光电自准直仪(40米1秒)
YRMAT1815B 光电自准直仪(15米0.5秒)
YRMAT2020B 光电自准直仪(20米0.5秒)
YRMAT3025B 光电自准直仪(25米0.5秒)
YRMAT3030B 光电自准直仪(30米0.5秒)
YRMAT3025C 光电自准直仪(25米0.3秒)
YRMAT3030C 光电自准直仪(30米0.3秒)
MC030-1401(1X5) 双向自准直仪(6-10米)
1401-15/20 双向自准直仪(15-20米)
S1401 数显双向自准直仪(6-10米)
S1401-15 数显双向自准直仪(15-20米)
YR-E360 传感器倾角检测仪
YR8-36 金属多面棱体
YR140-205 多齿分度台
YR-5L 自准直仪光学五棱镜
YR-WTPT 自准直仪光学直角器微调平台
TP-2 自准直仪专用精密三脚架
YR-1S 数显自准直仪(30米,1秒)
YR-0.1S 数显自准直仪(30米,0.1秒)
YR1000U-3050 光电自准直仪(25/10米)
YR25PC02 光电自准直仪(25米,0.2角秒)
YR25TL02 光电自准直仪(25米,0.2角秒)
YR25D10 电子自准直仪(25米,1.0角秒)
YR20TL05 光电自准直仪(20米,0.5角秒)
YR20W10 远程自准直仪(20米,1.0角秒)
YR10PC01 光电自准直仪(10米,0.1角秒)
YR10TL01 光电自准直仪(10米,0.1角秒)
YR2038 电子自准直仪(10米,1角秒)
YR10TL03 光电自准直仪(10米,0.3角秒)
YR10W06 远程自准直仪(10米,0.6角秒)
YR05TL02 光电自准直仪(5米,0.2角秒)
YR04TL001 光电自准直仪(4米,0.01角秒)
YR05GMS 电子比较测角仪
YR0515GMM 小型电子比较测角仪
YROP10 电子式光学平行差测量仪
YR-001D 自准直仪多轴位移工作台
YR-01X 自准直仪旋转位移工作台
YR-SL 自准直仪升降工作台
自准直仪配件
正多面棱体
多齿分度台
细多齿分度台
立卧两用多齿分度台
高精度转台
光学棱镜
洛氏硬度计
显微硬度计
维氏硬度计
布氏硬度计
邵氏硬度计/巴氏硬度计/韦氏硬度计
进口硬度计
硬度计耗材/配件
金相试样切割机
金相试样磨抛机
金相试样镶嵌机
金相试样预磨机/抛光机
光谱砂带磨样机/磨平机/电解抛光腐蚀仪
金相制样耗材
CMAS清洁度检测分析系统
MMAS科研级工业自动显微镜测量系统
IMAS复合材料断裂韧性残余应力检测仪
BMAS材料气泡测量分析系统
金相显微镜
体视显微镜
生物显微镜
偏光显微镜/荧光显微镜
其它显微镜(工具/比较/进口)
电子万能试验机
液压万能试验机
冲击试验机
光谱仪
元素分析仪/碳硫分析仪
色谱仪
光度计
影像测量仪
投影仪
三坐标测量机
轮廓测量仪
圆度仪
探伤仪
粗糙度仪
测高仪
测厚仪
测温仪
测振仪
石油化工仪器
气体检测仪
食品仪器
内窥镜
3D打印设备
滴定仪/浊度计/水分测定仪
扭矩扳手/推拉力计
马弗炉/干燥箱/培养箱/试验箱
教学实训装置
熔点仪
旋光仪
折光仪/折射仪/糖度计/密度计/浓度仪
离心机/离心浓缩仪
滴点软化点测定仪/差示扫描量热仪
4008127833/021-58391850
扫一扫关注我们
硬度计案例 硬度计技术
试验机案例 试验机技术
金相制样案例 金相制样技术
自准直仪案例 自准直仪技术
显微镜案例 显微镜技术
实验室保养 实验室搬迁
研润简介 研润发展历程
人才与招聘
研润旗下产品及公司简介
维氏硬度计 洛氏硬度计 硬度计
自准直仪 拉力试验机 硬度计
万能试验机 金相抛光机 硬度计
金相切割机 金相切割机 硬度计
圆度仪 轮廓仪 硬度计 硬度计
自准直仪 自准直仪 硬度计
显微镜 金相显微镜 硬度计
金相切割机 影像测量仪 硬度计
布氏硬度计 自准直仪 金相磨抛机
硬度计 自准直仪 硬度计,金相切割机
上海研润光机科技有限公司成立于2005年,是
一家以研发、生产、非标定制自动化检测设备,
计算机软件开发为主的高新技术企业。主导产品
光学和材料性能仪器,包括硬度计、试验机、显
微镜、金相制样、工业自动化流水线定制、非标
自动化质量控制检验、工业机器人、高精度光学
自准直仪、残余应力测试、复合材料测试等设备。
YR-01X 自准直仪旋转位移工作台
YR-01X Photoelectric Autocollimator supplied by CHWES. 0 key specifications available on request.
Specifications
* Generated by rule engine over the product database; for pre-selection only.
Working principle
An autocollimator projects an illuminated cross-line as a parallel beam onto an external mirror. The mirror returns the beam, which re-images on the reticle or a CCD/CMOS sensor. If the mirror tilts by θ, the return image shifts by s = 2f·tanθ — the angle is doubled optically and magnified by the focal length.
Photoelectric readout (CCD/CMOS centroiding or PSD differential detection with software subdivision) reaches 0.1″ resolution. Dual-axis models read horizontal and vertical tilt simultaneously; large-field versions such as the HXDS15-4000 (4000×3000″) image a wide angular range for dynamic measurements.
Stepping a mirror bridge along a guideway converts per-step tilts θi into elevation differences hi = L·tanθi for straightness and flatness; with polygons or multi-tooth tables the same instrument calibrates circular indexing.
Process animation
- Setup: mount the mirror on a bridge of span L at the start of the guideway.
- Zeroing: adjust the autocollimator until the cross image centres, record the initial reading.
- Step: advance the bridge by L each station, logging θi (both axes on dual-axis models).
- Evaluate: accumulate hi = L·tanθi and rate straightness or flatness by end-point or minimum-zone methods.
- Indexing: with a polygon, successive face readings give the index error; issue the report.
Calculation & formulas
1. Angle-image relation: θ = s/(2f); with f = 500 mm and s = 5 µm, θ ≈ 1.03″ (1″ ≈ 4.85 µrad).
2. Resolution: 0.1″ corresponds to s ≈ 0.485 µm at f = 500 mm — pixels ≤5 µm plus 1/10 subdivision.
3. Elevation step: h = L·tanθ; a 100 mm bridge at 2″ gives h ≈ 0.97 µm.
4. End-point straightness: cumulative deviations Δi = Σhk − (i/n)Σh, error f = max(Δ) − min(Δ); the minimum-zone method rotates the datum per convex/concave/alternating criteria.
5. Indexing: per-face errors φj minus nominal; the closure Σφ = 0 checks the full circle.
Standards
| Standard | Title | Scope |
|---|---|---|
| JJG 202-2007 | Verification regulation of autocollimators | Indication error and resolution |
| GB/T 11336-2004 | Detection of straightness error | Guideway and surface-plate straightness |
| GB/T 1958-2017 | GPS — detection and evaluation of geometrical deviations | Flatness, squareness and other form errors |
| ISO 230-1 | Machine tools — geometric accuracy tests | Machine acceptance |
| JJG 283-2007 | Multi-tooth indexing table verification | Circular indexing calibration |
Accredited labs must also hold 20±0.5 °C and vibration isolation, with instrument error within the 0.5″/1″ class.
Selection guide
1. Resolution decides acceptance capability: 0.1″ (HXJL300-0.1, HXJL300U-0.1, HXJL300UH-0.1) for precision machines, rotary tables and laboratory standards; 0.2–0.3″ for general machine acceptance; 0.5–1″ (HXM series) for on-site alignment and long-range monitoring.
2. Distance decides aperture: 5–10 m with HXM2010/HXJL200; 20–30 m with HXM2020/HXM3030; 35–40 m with HXM3540; 50 m baseline with HXM4050M-1. Mirror aperture and light budget matter more as distance grows.
3. Single or dual axis: single-axis HXJL for one-direction straightness; dual-axis HXM for both directions and polygon indexing.
4. Dynamic work: HXDS15-4000 with a large field and high sampling rate for rotary-table oscillation, shaker tables and thermal drift.
5. Accessories: mirror bridges at 50/100/200 mm span, 12/24/36-face polygons, pentaprism for squareness, intermediate targets for long runs, thermal hoods for workshops.
6. Software and compliance: end-point, minimum-zone and least-squares evaluation with ISO 230-1 reports; labs also need the standard-artefact interface for verification.
| Model | Resolution | Distance | Typical use |
|---|---|---|---|
| HXJL300UH-0.1 | 0.1″ | 0–10 m | Precision tables, lab standards |
| HXJL300U-0.1 / HXJL300-0.1 | 0.1″ | 0–10 m | Precision guideways and plates |
| HXJL300-0.2 / -0.3 | 0.2–0.3″ | 0–10 m | General machine acceptance |
| HXM2010 / HXM2020 | 0.5–1″ | 10–20 m | Mid-size gantry, moulding machines |
| HXM3030 / HXM3540 | 0.5–1″ | 30–40 m | Large gantry, marine parts |
| HXM4050M-1 | 1″ | 50 m | Long guideways, cross-shop datums |
| HXDS15-4000 | Dynamic dual-axis | Large field | Table oscillation, vibration |
Common mistakes: using a 1″ unit to trend a 0.02 mm/m guideway; ignoring bridge sag under mirror weight; not controlling air currents and floor vibration, so readings never settle.
Test method
Environment: 20±0.5 °C (±2 °C on the floor with compensation), shield air currents and sunlight; soak the instrument and bridge for 30 minutes on an isolated base.
Straightness procedure: ① clean the guideway and set the bridge span L; ② zero at the first station after 10 minutes of warm-up; ③ step by exactly L (within 0.5 mm), logging both axes; ④ evaluate by end-point and minimum-zone methods and report the larger; ⑤ record span, temperature and uncertainty (typically U ≈ 0.5″ + 2% of reading).
Intermediate checks: monthly 12-face polygon closure (Σ = 0, residual ≤0.3″); send standards out every two years.
Pitfalls: span errors feed straight into height differences; air currents jitter the centroid; thermal gradients bend long guideways optically — measure morning and afternoon and average.
Industry applications
- Machine tools: gantry and boring-mill guideway straightness, column and spindle squareness, table flatness to ISO 230-1 and GB/T 11336; repeatability ≤1 µm over 24 m with the end-point method.
- Metrology institutes: surface-plate flatness, cross-checks with electronic levels, small-angle standard build-up; indication error within ±0.5″/±1″ per JJG 202-2007.
- Indexing and rotary tables: multi-tooth tables, optical and CNC rotary tables, RV reducer backlash; full-circle checks with 12/24/36-face polygons, indexing error ≤±1″.
- Semiconductor stages: micro-angle feedback and thermal drift monitoring on air-bearing and wafer stages, resolution ≤0.01″ at ≥10 Hz.
- Inertial navigation and optics: reference-mirror alignment and angle transfer for gyro platforms, theodolites and interferometers.
- Energy equipment: turbine bearing alignment, wind-turbine flange squareness, long hydro shaft lines.
- Rail and elevators: guide-rail straightness and twist, body datum flatness, often at 30–50 m working distance.
- Research and teaching: optical bench levelling and micro-angle measurement.


