MMAS-27 Metallurgical Microscope (明暗场)

Metallurgical Microscope · 明暗场

ModelMMAS-27
  • 物镜(明暗场)无限远平场消色差物镜PLL 5X/0.12BD,工作距离:8.05mm
  • 放大倍数50~600X
  • 目镜筒倾斜30度,瞳距调节范围53-75mm
  • 落射照明系统12V50W卤素灯,亮度可调

By submitting you agree to our privacy policy.

01

Overview

MMAS-27无限远明暗场金相显微镜测量分析系统适用于对不透明物体或透明物体的显微观察。采用优良的无限远光学系统与模块化功能设计理念、可提供出色的光学性能与产品系统升级,实现透反射同步或者独立照明,偏光观察、暗场观察等功能,产品操作方便,造型美观,图像清晰,是生物学、金属学、矿物学、精密工程学、电子学等研究的理想仪器。 MMAS-27系统配备了研润自主研发的MMAS测量分析系统以及MOS高端光学系统。
技术特点:
1、透反射照明系统;
2、无限远光学系统;
3、明暗场观察系统;
技术参数:
目镜
大视野 WF10X(Φ22mm)
物镜(明暗场)
无限远平场消色差物镜PLL 5X/0.12BD,工作距离:8.05mm
无限远平场消色差物镜PL L10X/0.25BD,工作距离:7.86mm
无限远平场消色差物镜PL L20X/0.40BD,工作距离:7.2mm
无限远平场消色差物镜PL L40X/0.60BD,工作距离:3.0mm
放大倍数
50~600X
目镜筒
倾斜30度,瞳距调节范围53-75mm
落射照明系统
12V50W卤素灯,亮度可调
内置视场光栏、孔径光栏、黄绿蓝滤色片和磨砂玻璃转换装置,推拉式检偏器与起偏器
透射照明系统
12V30W卤素灯,亮度可调,蓝滤色片与磨砂玻璃;
阿贝聚光镜NA1.25可上下升降,集光镜中内置视场光栏
调焦机构
粗微动同轴调焦, 微动格值:2μm,粗动松紧可调,带锁紧和限位装置
转换器
五孔(内向式滚珠内定位);
载物台
双层机械移动式(尺寸:210mmX140mm,移动范围:63mmX50mm)
外形尺寸
455*545*260
配备系统
主机+MMAS数据处理系统1套+MOS光学系统一套+电脑一套

MMAS-27 Metallurgical Microscope (明暗场) supplied by CHWES. 10 key specifications available on request.

02

Specifications

物镜(明暗场)无限远平场消色差物镜PLL 5X/0.12BD,工作距离:8.05mm
放大倍数50~600X
目镜筒倾斜30度,瞳距调节范围53-75mm
落射照明系统12V50W卤素灯,亮度可调
透射照明系统12V30W卤素灯,亮度可调,蓝滤色片与磨砂玻璃;
调焦机构粗微动同轴调焦, 微动格值:2μm,粗动松紧可调,带锁紧和限位装置
转换器五孔(内向式滚珠内定位);
载物台双层机械移动式(尺寸:210mmX140mm,移动范围:63mmX50mm)
外形尺寸455*545*260
配备系统主机+MMAS数据处理系统1套+MOS光学系统一套+电脑一套

* Generated by rule engine over the product database; for pre-selection only.

03

Working principle

The metallurgical microscope uses an infinity-corrected optical path with reflected Köhler illumination. Light passes the collector, field stop and aperture stop, is deflected by a semi-transparent mirror through the objective onto the specimen, and returns through the same objective to the eyepiece or camera.

  • Bright field for routine microstructure, inclusions and decarburised layers.
  • Dark field collects scattered light to reveal grain boundaries, cracks and non-metallic inclusions.
  • Polarised light identifies anisotropic phases, spheroidised structures and coating stress.
  • DIC converts tiny height differences into contrast, ideal for polished, unetched samples.

Objectives of 5× to 100× are combined with 10× eyepieces. Higher numerical aperture gives better resolution but shallower depth of field.

04

Process animation

  1. Sampling and preparation: sectioning, mounting, grinding, polishing, etching.
  2. Illumination and focus: select BF/DF/POL/DIC and focus.
  3. Image capture: trinocular port, 1× camera adapter, white balance.
  4. Scale calibration: calibrate µm per pixel with a stage micrometer.
  5. Measurement: grain size, case depth, coating thickness, inclusion rating.
0102030405
05

Calculation & formulas

1. System magnification: M = objective × eyepiece × adapter, e.g. 40× / 10× / 1× = 400×.

2. Resolution: d = 0.61λ/NA (λ≈550 nm). A 40× objective with NA 0.65 resolves 0.52 µm; an NA 0.95 dry objective reaches 0.35 µm.

3. Depth of field scales with λ/NA² — higher NA, shallower depth; use low NA for fracture surfaces.

4. Grain size (GB/T 6394): at 100×, grains N per 645 mm² field follow N = 2G−1; counting 128 grains gives G = log2128 + 1 = 8. Intercept method: mean intercept L̄ = line length ÷ intercepts, G = −6.6437 lg L̄ (mm, 100×).

5. Effective case depth: distance to 550 HV1, fitted from a micro-hardness traverse and averaged over three positions.

06

Standards

StandardTitleScope
GB/T 13298-2015Metallic materials — examination of microstructureMicrostructure rating
GB/T 6394-2017Determination of average grain sizeGrain size
ASTM E3-11Guide for metallographic specimen preparationPreparation
ASTM E112Determining average grain sizeGrain size
ISO 643Steels — micrographic determination of grain sizeGrain size

Export projects often require dual GB and ASTM reports; the software ships both rating charts.

07

Selection guide

1. Surface or cross-section: stereo microscopes (HX-ZG7, XSZ) for fracture surfaces, solder joints and coatings; upright or inverted metallurgical microscopes (HX-4, HX-G series) for microstructure, case depth and inclusions.

2. Upright or inverted: upright for small specimens that are flipped often; inverted (HX-G3A/G4C/G5A) for large, heavy parts such as gears, shafts and tube sections that go straight onto the stage without re-mounting.

3. Optics set the ceiling: plan achromats cover routine rating; semi-apochromats or apochromats with a research stand (HX-G5A) are needed for 1000× precipitates and brightfield/darkfield/polarised switching.

4. Three levels of digitalisation: a 5 MP camera for images; camera plus analysis software (grain size, case depth, inclusions, porosity) for automatic rating and reports; motorised stage with scanning and stitching for unattended batches.

5. Do not forget accessories: polariser, darkfield, DIC, and a microhardness interface.

6. Room: an anti-vibration bench at 20±3 °C for research stands; keep preparation and microscopy rooms separate to avoid abrasive dust.

SeriesTypeTypical taskRecommended setup
HX-4A / HX-4BUpright metallurgicalRoutine structure, case depth5×/10×/40× + 5 MP camera
HX-G2A / G2BInvertedBatch samples, no re-mountingBrightfield + simple polariser
HX-G3ATrinocular invertedCase depth, rating, reportsCamera + analysis software
HX-G4C / G5AResearch invertedDarkfield/polarised/DICSemi-apochromat + motorised stage
HX-ZG7 / XSZ-146StereoFracture, solder, low-mag locatingZoom + ring light

Common misconceptions: higher magnification is not better (numerical aperture limits resolution, 100× dry is the practical ceiling); ignoring stage travel so large samples do not fit; buying the stand without software and still rating by eye, which kills repeatability.

08

Test method

Preparation. Section perpendicular to the feature of interest. Keep hot-mounting below 150 °C for aluminium and quenched parts, or use cold mounting. Grind 320→600→800→1200, removing previous scratches at each step; polish with 3 µm then 1 µm diamond. Etchants: 4% nital for carbon steel (3–8 s), aqua regia or electrolytic for stainless, Keller for aluminium.

Examination. Locate a representative field at 5×/10×, then switch to higher power. Rate grain size to GB/T 6394 by comparison or intercept. Measure case depth at 500× with an ocular scale or calibrated software, averaging five readings.

Calibration. Verify µm/pixel daily with a stage micrometer, check against a certified specimen quarterly, record three fields per sample and archive images with scale bars.

Pitfalls. Over-etching widens boundaries and fakes decarburisation; residual scratches can be mistaken for cracks; rounded mounting edges inflate case depth. Keep an unetched specimen for coating and crack review.

09

Industry applications

  • Steel and heat treatment: decarburised depth, carburised/nitrided case depth, grain size (GB/T 6394), non-metallic inclusions (GB/T 10561), banding and Widmanstätten rating.
  • Non-ferrous metals: aluminium grain and recrystallisation, alpha/beta ratio in brass, twinning and corrosion morphology in magnesium.
  • Welding and brazing: penetration, HAZ width, porosity and cracks, intermetallic thickness at dissimilar joints.
  • Additive manufacturing: porosity, lack-of-fusion defects, melt-pool morphology in SLM parts, porosity repeatability within 0.2%.
  • Bearings and gears: martensite rating, retained austenite, carbide network and banding, grinding burn and white layer.
  • Electronics: IMC thickness, plating cross-sections, PCB micro-sections, gold wire ball bonds (stereo plus metallurgical).
  • Powders and ceramics: particle morphology and size, sintered porosity, coating cross-section thickness.
  • Failure analysis: fracture surface macro and micro morphology, corrosion products, crack path and origin, with stereo microscopy for low-magnification locating.
10

Price and lead time for this model

By submitting you agree to our privacy policy.

⇄0CompareProduct comparison