MC030-WF100-6000 Photoelectric Autocollimator

Photoelectric Autocollimator

ModelMC030-WF100-6000
  • 型号MC030-WF100-6000
  • 物镜焦距100mm
  • 通光口径38mm
  • 最大测量距离2m

By submitting you agree to our privacy policy.

01

Overview

大视场系列光电自准直仪主要应用于实验室对测角范围要求比较大的场景,凭在科研探索与工业研发中,当面对大型设备或复杂结构的精确角度测量时,它能有效覆盖更广泛的测量范围。
一、产品应用:
机床行业:主要应用用机床导轨直线度、平行度、垂直度以及大型平板的平面度检测;
光学行业:主要用于光学产品装调,各种棱镜的角度测量等;
计量与科研:主要用于检定校准其他检测设备或工具,以及各种科学研究活动如各种精密角度测量或动态监测产品的位置变化(角度)或者动态测量运动产品的角度变化或直线度误差等;
大理石精度检测:这样用于大理石直线度、平行度、垂直度、平面度等几何精度检测;
编码器:主要用于角度编码器的定位精度或重复性精度检测。
二、技术参数:
1、型号:MC030-WF100-6000;
2、物镜焦距:100mm;
3、通光口径:38mm;
4、最大测量距离:2m;
5、视场范围(X、Y):6000*4500″;
6、分辨率:0.1″、0.01″、0.001″、0.0001″可调 (arc sec. 角秒 );
7、示值精度:±1000″≤ ±2″;全程≤ ±3″;
8、重复性:≤ 0.05″
9、中心波长:625nm;
10、测量频响:≤ 30HZ(Hz TYP.);
11、光源类型:半导体 LED 光源;
12、通讯方式:USB2.0;
13、第三方通讯接口:RS-232;
14、显示方式:基于普通 PC 的软件显示;
15、电源:内部集成供电;
16、仪器尺寸(长 * 宽 * 高):157*115*105mm;
17、主机重量:1.81kg;
三、自准直仪的典型应用:
1.直线度测试:直线度测量和验证是自准直仪在机械制造行业典型的应用之一。本系列准直仪测试直线度具有精度高、重复性好和双方向同时检测的优点。在直线度测量中,借助一个桥板将角度量转化为位移量进行测量,测量中使用首尾搭接法通过在整个测量行程内分段移动桥板完成测量过程。如图:
2.自准直仪平面度测试:平面度测量和验证是自准直仪进行直线度测量的拓展应用。通过对待测平面的若干直线进行测量(通常测量为米字型或者网格分布),最后将测试结果进行计算分析。整个测量过程根据精度的要求和平面尺寸选用2个或3个不同尺寸的测量桥板进行配合使用。如图:
3.自准直仪垂直度测试:垂直度测量和验证原理为采用自准直仪分别测量两条待测导轨的直线度后,根据测量结果分析出两条导轨的共面垂直度偏差,测量中基准的传递采用直角转像镜(光学五棱镜)进行。如图,先测试一条导轨的直线度并作为基准线,然后将直角转像镜放置在另一导轨位置后进行第二条直线测量并作为测量线。使用基准线的直线度包容区旋转90度后对测量线的直线度曲线进行包容后的结果即为垂直度偏差值。
4.自准直仪平行度测试:平行度测量和验证的基本原理是采用自准直仪分别测量两条待测导轨的直线度后,根据测量结果计算出两条导轨的共面平行度偏差,测量中的基准传递是采用直角转像镜(光学五棱镜)进行。如图,首先测量一条导轨的直线度并作为基准线,随后将直角转像镜移动至另一导轨位置后进行第二条直线测量并作为测量线。使用基准线的直线度包容区平移后对测量线的直线度曲线进行包容后的结果即为平行度偏差值。
5.自准直仪位置不确定度测试:自准直仪结合多面棱体和检测的旋转平台可以进行角度的不确定度检测。
6.多个自准直仪组合对光学块进行比较测量。(可以组合成测角仪)

MC030-WF100-6000 Photoelectric Autocollimator supplied by CHWES. 17 key specifications available on request.

02

Specifications

型号MC030-WF100-6000
物镜焦距100mm
通光口径38mm
最大测量距离2m
视场范围(X、Y)6000*4500″
分辨率0.1″、0.01″、0.001″、0.0001″可调 (arc sec. 角秒 )
示值精度±1000″≤ ±2″;全程≤ ±3″
重复性≤ 0.05″
中心波长625nm
测量频响≤ 30HZ(Hz TYP.)
光源类型半导体 LED 光源
通讯方式USB2.0
第三方通讯接口RS-232
显示方式基于普通 PC 的软件显示
电源内部集成供电
仪器尺寸(长 * 宽 * 高)157*115*105mm
主机重量1.81kg

* Generated by rule engine over the product database; for pre-selection only.

03

Working principle

An autocollimator projects an illuminated cross-line as a parallel beam onto an external mirror. The mirror returns the beam, which re-images on the reticle or a CCD/CMOS sensor. If the mirror tilts by θ, the return image shifts by s = 2f·tanθ — the angle is doubled optically and magnified by the focal length.

Photoelectric readout (CCD/CMOS centroiding or PSD differential detection with software subdivision) reaches 0.1″ resolution. Dual-axis models read horizontal and vertical tilt simultaneously; large-field versions such as the HXDS15-4000 (4000×3000″) image a wide angular range for dynamic measurements.

Stepping a mirror bridge along a guideway converts per-step tilts θi into elevation differences hi = L·tanθi for straightness and flatness; with polygons or multi-tooth tables the same instrument calibrates circular indexing.

04

Process animation

  1. Setup: mount the mirror on a bridge of span L at the start of the guideway.
  2. Zeroing: adjust the autocollimator until the cross image centres, record the initial reading.
  3. Step: advance the bridge by L each station, logging θi (both axes on dual-axis models).
  4. Evaluate: accumulate hi = L·tanθi and rate straightness or flatness by end-point or minimum-zone methods.
  5. Indexing: with a polygon, successive face readings give the index error; issue the report.
0102030405
05

Calculation & formulas

1. Angle-image relation: θ = s/(2f); with f = 500 mm and s = 5 µm, θ ≈ 1.03″ (1″ ≈ 4.85 µrad).

2. Resolution: 0.1″ corresponds to s ≈ 0.485 µm at f = 500 mm — pixels ≤5 µm plus 1/10 subdivision.

3. Elevation step: h = L·tanθ; a 100 mm bridge at 2″ gives h ≈ 0.97 µm.

4. End-point straightness: cumulative deviations Δi = Σhk − (i/n)Σh, error f = max(Δ) − min(Δ); the minimum-zone method rotates the datum per convex/concave/alternating criteria.

5. Indexing: per-face errors φj minus nominal; the closure Σφ = 0 checks the full circle.

06

Standards

StandardTitleScope
JJG 202-2007Verification regulation of autocollimatorsIndication error and resolution
GB/T 11336-2004Detection of straightness errorGuideway and surface-plate straightness
GB/T 1958-2017GPS — detection and evaluation of geometrical deviationsFlatness, squareness and other form errors
ISO 230-1Machine tools — geometric accuracy testsMachine acceptance
JJG 283-2007Multi-tooth indexing table verificationCircular indexing calibration

Accredited labs must also hold 20±0.5 °C and vibration isolation, with instrument error within the 0.5″/1″ class.

07

Selection guide

1. Resolution decides acceptance capability: 0.1″ (HXJL300-0.1, HXJL300U-0.1, HXJL300UH-0.1) for precision machines, rotary tables and laboratory standards; 0.2–0.3″ for general machine acceptance; 0.5–1″ (HXM series) for on-site alignment and long-range monitoring.

2. Distance decides aperture: 5–10 m with HXM2010/HXJL200; 20–30 m with HXM2020/HXM3030; 35–40 m with HXM3540; 50 m baseline with HXM4050M-1. Mirror aperture and light budget matter more as distance grows.

3. Single or dual axis: single-axis HXJL for one-direction straightness; dual-axis HXM for both directions and polygon indexing.

4. Dynamic work: HXDS15-4000 with a large field and high sampling rate for rotary-table oscillation, shaker tables and thermal drift.

5. Accessories: mirror bridges at 50/100/200 mm span, 12/24/36-face polygons, pentaprism for squareness, intermediate targets for long runs, thermal hoods for workshops.

6. Software and compliance: end-point, minimum-zone and least-squares evaluation with ISO 230-1 reports; labs also need the standard-artefact interface for verification.

ModelResolutionDistanceTypical use
HXJL300UH-0.10.1″0–10 mPrecision tables, lab standards
HXJL300U-0.1 / HXJL300-0.10.1″0–10 mPrecision guideways and plates
HXJL300-0.2 / -0.30.2–0.3″0–10 mGeneral machine acceptance
HXM2010 / HXM20200.5–1″10–20 mMid-size gantry, moulding machines
HXM3030 / HXM35400.5–1″30–40 mLarge gantry, marine parts
HXM4050M-11″50 mLong guideways, cross-shop datums
HXDS15-4000Dynamic dual-axisLarge fieldTable oscillation, vibration

Common mistakes: using a 1″ unit to trend a 0.02 mm/m guideway; ignoring bridge sag under mirror weight; not controlling air currents and floor vibration, so readings never settle.

08

Test method

Environment: 20±0.5 °C (±2 °C on the floor with compensation), shield air currents and sunlight; soak the instrument and bridge for 30 minutes on an isolated base.

Straightness procedure: ① clean the guideway and set the bridge span L; ② zero at the first station after 10 minutes of warm-up; ③ step by exactly L (within 0.5 mm), logging both axes; ④ evaluate by end-point and minimum-zone methods and report the larger; ⑤ record span, temperature and uncertainty (typically U ≈ 0.5″ + 2% of reading).

Intermediate checks: monthly 12-face polygon closure (Σ = 0, residual ≤0.3″); send standards out every two years.

Pitfalls: span errors feed straight into height differences; air currents jitter the centroid; thermal gradients bend long guideways optically — measure morning and afternoon and average.

09

Industry applications

  • Machine tools: gantry and boring-mill guideway straightness, column and spindle squareness, table flatness to ISO 230-1 and GB/T 11336; repeatability ≤1 µm over 24 m with the end-point method.
  • Metrology institutes: surface-plate flatness, cross-checks with electronic levels, small-angle standard build-up; indication error within ±0.5″/±1″ per JJG 202-2007.
  • Indexing and rotary tables: multi-tooth tables, optical and CNC rotary tables, RV reducer backlash; full-circle checks with 12/24/36-face polygons, indexing error ≤±1″.
  • Semiconductor stages: micro-angle feedback and thermal drift monitoring on air-bearing and wafer stages, resolution ≤0.01″ at ≥10 Hz.
  • Inertial navigation and optics: reference-mirror alignment and angle transfer for gyro platforms, theodolites and interferometers.
  • Energy equipment: turbine bearing alignment, wind-turbine flange squareness, long hydro shaft lines.
  • Rail and elevators: guide-rail straightness and twist, body datum flatness, often at 30–50 m working distance.
  • Research and teaching: optical bench levelling and micro-angle measurement.
10

Price and lead time for this model

By submitting you agree to our privacy policy.

⇄0CompareProduct comparison