Hàng không vũ trụ2024

CMM chính xác MGH quét cánh tuabin

CMM MGH ±(0,5+L/600) um quét 12 mặt cắt cánh; dung sai biên dạng 0,02 mm, đồng nhất diện tích +40%.

Công ty
Nhà máy cánh tuabin, Tây Nam Trung Quốc
Địa chỉ
Thành Đô, Tứ Xuyên
CMM chính xác MGH quét cánh tuabin
±(0.5+L/600) μmMPE E
1.05%Sai lệch diện tích

HP turbine blades carry a 0.02 mm profile tolerance. Master-blade comparison on an optical projector gave only qualitative judgments, with no data on suction- and pressure-side deviations; paired throat areas differed by 1.8%, hurting engine efficiency.

Solution: an MGH high-accuracy CMM with MPE E=±(0.5+L/600) um and a rotary table for 4-axis scanning, continuously sampling 12 design sections per blade at 800 points each. Software best-fits the nominal airfoil and outputs profile, chord, stagger angle and throat area.

Results: profile measured 0.011-0.018 mm, fully in control. After two corrections to the casting die cavity from deviation maps, paired throat-area deviation converged from 1.8% to 1.05%, and rig-test efficiency improved by 0.4 percentage points.

⇄0So sánhSo sánh thông số