XZB-14 Metallurgical Microscope

Metallurgical Microscope

型番XZB-14

    By submitting you agree to our privacy policy.

    01

    製品概要

    XZB-14比较显微镜是通过光学放大,由同一组目镜同时观察左右两物方视场物体的像,运用视场切割对接、重叠对两个或两个以上物体进行宏观或微观比较。由于成像清晰,分辨率高,因此可鉴别其微小差异。
    XZB-14型比较显微镜是我公司积累多年经验,充分吸收国内外同类产品的精华,开发的新一代升级产品,该产品成功地解决了比较棱线宽窄及其一致性可调及双目系统倒置的技术难题,从而使比较显微镜的主要技术性能达到先进水平。
    XZB-14型是我公司更新换代的升级产品,它不仅保留了传统产品的优良技术性能,同时提高了其成像质量和功能范围、扩大了10X和20X目镜的视场直径、桥体采用电动升降;并保持联动工作台,照明方式和多种附件等,倒置式双目观察系统(位于桥体下方)使仪器造型、结构更加美观、合理、可靠,更符合人体工程学原理,从而充分发挥其比较鉴别的功能。
    二、XZB-14比较显微镜产品应用
    本产品是公安、检察、法院进行文检、痕检及其学校教学的理想仪器(用于对枪弹、工具痕迹、指纹、印章、文字、货币等进行比对鉴别),也适合于银行、考古、电子学、生物学、农业等需要对物体进行比较鉴别的行业和部门使用。
    三、XZB-14比较显微镜主要技术参数
    1、光学放大范围:3×~200×(包括选购件)
    2、目镜:WF10×/φ22 WF20×/φ12(20X目镜为选购件)
    3、物镜:0.3×、1×、1.5×、2×、4×、6×、10×七档
    4、桥体开档尺寸:460mm
    5、双目瞳距调节范围:60~75

    XZB-14 Metallurgical Microscope supplied by CHWES. 0 key specifications available on request.

    02

    仕様

    * Generated by rule engine over the product database; for pre-selection only.

    03

    測定原理

    The metallurgical microscope uses an infinity-corrected optical path with reflected Köhler illumination. Light passes the collector, field stop and aperture stop, is deflected by a semi-transparent mirror through the objective onto the specimen, and returns through the same objective to the eyepiece or camera.

    • Bright field for routine microstructure, inclusions and decarburised layers.
    • Dark field collects scattered light to reveal grain boundaries, cracks and non-metallic inclusions.
    • Polarised light identifies anisotropic phases, spheroidised structures and coating stress.
    • DIC converts tiny height differences into contrast, ideal for polished, unetched samples.

    Objectives of 5× to 100× are combined with 10× eyepieces. Higher numerical aperture gives better resolution but shallower depth of field.

    04

    Process animation

    1. Sampling and preparation: sectioning, mounting, grinding, polishing, etching.
    2. Illumination and focus: select BF/DF/POL/DIC and focus.
    3. Image capture: trinocular port, 1× camera adapter, white balance.
    4. Scale calibration: calibrate µm per pixel with a stage micrometer.
    5. Measurement: grain size, case depth, coating thickness, inclusion rating.
    0102030405
    05

    Calculation & formulas

    1. System magnification: M = objective × eyepiece × adapter, e.g. 40× / 10× / 1× = 400×.

    2. Resolution: d = 0.61λ/NA (λ≈550 nm). A 40× objective with NA 0.65 resolves 0.52 µm; an NA 0.95 dry objective reaches 0.35 µm.

    3. Depth of field scales with λ/NA² — higher NA, shallower depth; use low NA for fracture surfaces.

    4. Grain size (GB/T 6394): at 100×, grains N per 645 mm² field follow N = 2G−1; counting 128 grains gives G = log2128 + 1 = 8. Intercept method: mean intercept L̄ = line length ÷ intercepts, G = −6.6437 lg L̄ (mm, 100×).

    5. Effective case depth: distance to 550 HV1, fitted from a micro-hardness traverse and averaged over three positions.

    06

    規格

    StandardTitleScope
    GB/T 13298-2015Metallic materials — examination of microstructureMicrostructure rating
    GB/T 6394-2017Determination of average grain sizeGrain size
    ASTM E3-11Guide for metallographic specimen preparationPreparation
    ASTM E112Determining average grain sizeGrain size
    ISO 643Steels — micrographic determination of grain sizeGrain size

    Export projects often require dual GB and ASTM reports; the software ships both rating charts.

    07

    選定ガイド

    1. Surface or cross-section: stereo microscopes (HX-ZG7, XSZ) for fracture surfaces, solder joints and coatings; upright or inverted metallurgical microscopes (HX-4, HX-G series) for microstructure, case depth and inclusions.

    2. Upright or inverted: upright for small specimens that are flipped often; inverted (HX-G3A/G4C/G5A) for large, heavy parts such as gears, shafts and tube sections that go straight onto the stage without re-mounting.

    3. Optics set the ceiling: plan achromats cover routine rating; semi-apochromats or apochromats with a research stand (HX-G5A) are needed for 1000× precipitates and brightfield/darkfield/polarised switching.

    4. Three levels of digitalisation: a 5 MP camera for images; camera plus analysis software (grain size, case depth, inclusions, porosity) for automatic rating and reports; motorised stage with scanning and stitching for unattended batches.

    5. Do not forget accessories: polariser, darkfield, DIC, and a microhardness interface.

    6. Room: an anti-vibration bench at 20±3 °C for research stands; keep preparation and microscopy rooms separate to avoid abrasive dust.

    SeriesTypeTypical taskRecommended setup
    HX-4A / HX-4BUpright metallurgicalRoutine structure, case depth5×/10×/40× + 5 MP camera
    HX-G2A / G2BInvertedBatch samples, no re-mountingBrightfield + simple polariser
    HX-G3ATrinocular invertedCase depth, rating, reportsCamera + analysis software
    HX-G4C / G5AResearch invertedDarkfield/polarised/DICSemi-apochromat + motorised stage
    HX-ZG7 / XSZ-146StereoFracture, solder, low-mag locatingZoom + ring light

    Common misconceptions: higher magnification is not better (numerical aperture limits resolution, 100× dry is the practical ceiling); ignoring stage travel so large samples do not fit; buying the stand without software and still rating by eye, which kills repeatability.

    08

    試験方法

    Preparation. Section perpendicular to the feature of interest. Keep hot-mounting below 150 °C for aluminium and quenched parts, or use cold mounting. Grind 320→600→800→1200, removing previous scratches at each step; polish with 3 µm then 1 µm diamond. Etchants: 4% nital for carbon steel (3–8 s), aqua regia or electrolytic for stainless, Keller for aluminium.

    Examination. Locate a representative field at 5×/10×, then switch to higher power. Rate grain size to GB/T 6394 by comparison or intercept. Measure case depth at 500× with an ocular scale or calibrated software, averaging five readings.

    Calibration. Verify µm/pixel daily with a stage micrometer, check against a certified specimen quarterly, record three fields per sample and archive images with scale bars.

    Pitfalls. Over-etching widens boundaries and fakes decarburisation; residual scratches can be mistaken for cracks; rounded mounting edges inflate case depth. Keep an unetched specimen for coating and crack review.

    09

    Industry applications

    • Steel and heat treatment: decarburised depth, carburised/nitrided case depth, grain size (GB/T 6394), non-metallic inclusions (GB/T 10561), banding and Widmanstätten rating.
    • Non-ferrous metals: aluminium grain and recrystallisation, alpha/beta ratio in brass, twinning and corrosion morphology in magnesium.
    • Welding and brazing: penetration, HAZ width, porosity and cracks, intermetallic thickness at dissimilar joints.
    • Additive manufacturing: porosity, lack-of-fusion defects, melt-pool morphology in SLM parts, porosity repeatability within 0.2%.
    • Bearings and gears: martensite rating, retained austenite, carbide network and banding, grinding burn and white layer.
    • Electronics: IMC thickness, plating cross-sections, PCB micro-sections, gold wire ball bonds (stereo plus metallurgical).
    • Powders and ceramics: particle morphology and size, sintered porosity, coating cross-section thickness.
    • Failure analysis: fracture surface macro and micro morphology, corrosion products, crack path and origin, with stereo microscopy for low-magnification locating.
    10

    Price and lead time for this model

    By submitting you agree to our privacy policy.

    ⇄0比較仕様比較